ARDEX WA Epoxijoint grey, 4kg

ARDEX WA

Epoxijoint - grey

•     For jointing of ceramic tiles, slabs, clinker, split tiles and mosaic
•     For adhesion of mosaic of glass and porcelain
•     on wall and floor surfaces
•     resistant to chemicals
•     Highly resilient
•     Easy to joint and wash
•     For joint widths from 2 to 15 mm

Application:

Indoors and outdoors. Wall and floor.

Grouting of ceramic tiles, slabs, clinker tiles, split tiles and mosaic under stress, against the cementitious mortar not sufficiently resilient or unstable.

z. B. in slaughterhouses, dairies, commercial kitchens, breweries, battery rooms, swimming areas and

Spas, shower rooms, baths, sales rooms, sports and leisure buildings and other areas where chemical or high mechanical loads occur.

For joint widths from 2 to 15 mm.


type:

Epoxy resin grout consisting of pasty resin and hardener components.

The 4 kg unit contains 3 kg of resin paste and 1 kg of hardener paste.

ARDEX WA Epoxijoint is waterproof, frost and weather resistant after hardening and has excellent strength and adhesion to tile edges.



Material consumption:

for joints - joint width 3 mm, joint depth 5 mm - are used for tiles or medium mosaic

of 10 x 10 cm approx. 0.45 kg / m2

from 20 x 20 cm approx. 0.25 kg / m2

of 30 x 30 cm approx. 0.30 kg / m2

from 11.5 x 24 cm approx. 0.30 kg / m2

of 5 x 5 cm approx. 0.90 kg / m2

ARDEX WA Epoxifuge is needed.


Losses due to wasted material may be between 0.10 and 0.20 kg / m2, depending on the type of tile and the method of processing.


processing time

(+20 ° C): approx. 80 min.


Laying time:

(+20 ° C): approx. 80 min.


Correction time

(+20 ° C): approx. 80 min.


walkability

(+20 ° C): after sufficient hardening, after approx. 12 hours


containers:

Bucket of 3 kg ARDEX WA base paste

Can with 1kg ARDEX WA hardener