1 kg = 2.64 €
ARDEX X90
MicroteC3 flexible adhesive
Product description
Cement-base
Blossom-free laying of tiles made of stoneware and porcelain stoneware, concrete and natural stone tiles indoors and outdoors.
Matches the ARDEX - MicroteC3 requirements
- highest frost-dew change resistance
- fast drying even at cool temperatures
- Driving rain resistance after approx. 2 hours
- Fiber reinforcement
For adhesive bed thicknesses up to 15 mm
Fully embedding without fluid bed behavior
Long processing time of 1 hour / walkable after approx. 3 hours
Very good adhesive from the beginning
Easy processing
Application
Indoors and outdoors. Wall and floor.
Making a flexible adhesive bed.
Preparation and installation of
- Tiles of stone, stoneware and porcelain stoneware
- Mosaic of glass and porcelain
- Concrete blocks
- Moisture insensitive natural stone tiles Laying tiles and slabs
- on balconies and terraces
- in swimming pools
- in heavy duty industrial and commercial areas
Preparation of ceramic facades coverings.
Laying of tiles on still shrinking concrete and masonry surfaces (at least 3 months old).
Claddings on heated screeds.
type:
Powders with cements, fillers, special additives, MICROTEC fibers and flexible plastics. When mixed with water, a smooth-pasty adhesive mortar with high stability is produced. The processing time is about 60 minutes. The mortar hardens by hydration and drying.
Material demands:
on a smooth surface:
about 1.1 kg / m² powder
with toothing 3 x 3 x 3 mm
approx. 2.1 kg / m² powder
with toothing 6 x 6 x 6 mm
about 2.6 kg / m² powder
with toothing 8 x 8 x 8 mm
approx. 3.2 kg / m² powder
with teeth 10x10x10 mm
approx. 4.6 kg / m² powder
at ARDEX Microtec toothing
processing time
(20 ° C): approx. 60 min.
placing time
(EN 1346): about 30 minutes
(measured on fresh mortar)
Package unit:
25kg paper bag
(0)
