ARDEX SK-W, sealing collar

ARDEX SK-W

TRICOM sealing collar 120 x120

The ARDEX SK-W

TRICOM Sealing collar 120x120 is prepared for a 1/2 inch pipe lead-through an existing opening. To make larger openings, use scissors or a knife to make the required cut-out, but cut out approx. 8 -12 mm smaller as needed. Place the recess of the sealing collar centered on the pipe lead-through. With even pressure, slip the sleeve over the pipe extension or the permanently installed pipe and bring it to the ground. The sealing collar fits correctly if it tightly fits to the pipe at least 4 mm.



Application:


Indoors and outdoors. Wall and floor.

Sealing set for flexible and watertight bridging of movement joints, edge joints and lead-througs which are in the risk of getting cracks.

In the system with:

ARDEX S1-K sealant

ARDEX S7 Flexible Sealing Slurry.

ARDEX 8 + 9 sealant

ARDEX SK100W TRICOM sealing membrane.

for use in composite waterproofing

- according to ZDB leaflet »Verbundabdichtungen«

for load classes A, B, C, A0 and B0

- in accordance with Building Regulations List A, Part 2, No. 1. 10

»Flüssig zu verarbeitende Abdichtungsstoffe im
 

Verbund mit... «, stress classes A, B and C

- according to ETAG 022 Waterproofing for walls and floors

in sanitary facilities,

Part 2: Waterproofing membranes


type:


The ARDEX SK TRICOM sealing kit consists of a polypropylene nonwoven backing laminated on both sides with a polyurethane backing layer or a polypropylene nonwoven backing laminated on both sides with a polyvinyl chloride backing and a butyl ring.

The material is waterproof, easy to cut with a knife or scissors, very well embedded in the waterproofing compounds, does not fold and has a high bondability to the sealants.

The low material thickness allows almost seamless coating with the ARDEX sealants.

The ARDEX SK TRICOM sealing set is sufficiently permeable to allow the sealant underneath to dry and harden.


Technical data according to ARDEX quality standard:


Color shade: white

Suitable: for joint widths up to max. 30 mm

elongation at rupture

Base layer: 600% at 60 N / 15 mm

Thickness > ca. 0.32 mm

Total weight: approx. 180 g / m2

Bursting pressure: 3.0 bar

Allowed

Movement absorption:

Max. 80% of the joint width

Temperature resistance:

-35 ° C to + 90 ° C

 

Packaging unit:

1 piece