ARDEX EP 2000
Multifunctional epoxi resin
- Barrier against rising humidity in concrete floors and cement screeds up to max. 8%
- Priming and hardening of substrates
- Filling cracks in screeds and concrete
- Production of epoxy screeds
- bonding
- Solvent-free
- resistant to chemicals
- Rollable and spreadable
- Easy to process
- High adhesion
- Two components
Application:
Floors inside and outdoors.
Barrier against rising damp.
Priming and hardening of substrates.
Filling cracks in screeds and concrete.
Bonding.
Production of epoxy screeds.
type:
ARDEX EP 2000 is a solvent-free, low-viscosity, unfilled two-component epoxy resin.
The 1 kg unit consists of 0.7 kg of resin (component A) and 0.3 kg of hardener (component B).
After hardening ARDEX EP 2000 is water-resistant, frost-resistant and weather-resistant, has a high intrinsic strength and is practically insoluble on all suitable substrates.
ARDEX EP 2000 is resistant to aqueous salt dilutions and alkalis as well as several diluted mineral and organic acids and organic liquids and solutions.
Technical data according to:
Mixing ratio:
1: 8 parts by weight
Bending tensile strength
(after 7d / + 23 ° C): 19.0 N / mm2
Compressive strength
(after 7d / + 23 ° C): 72.0 N / mm2
Walkability: after 12 hours
Laying time: after 24 hours
Consumption:
about 2.2 kg ARDEX EP2000 and
17.3 kg ARDEX SPS special sand
per m2 / cm layer thickness
Mixing ratio:
1:11 parts by weight
Bending tensile strength
(after 7d / + 23 ° C): 14.0 N / mm2
Compressive strength
(after 7d / + 23 ° C): 53.0 N / mm2
Walkability: after 12 hours
Laying time: after 24 hours
Consumption: approx. 1.6 kg ARDEX EP2000 and
17.3 kg ARDEX SPS special sand
containers:
Can 1kg
(0.7kg resin + 0.3kg hardener)
(0)
