ARDEX FB
Pouring resin
- Epoxy resin-based
- For the friction-locked connection of cracks in screeds and other substrates
- As bonding layer between substrate and new mortar or concrete
- High Flowable
- Excellent absobtion
Application:
Pouring, dowelling and non-positive connection of cracks and dummy joints (incised joints) in screeds - including heated screeds - and other substrates.
Bonding layer between substrate and new mortar, old and new concrete.
For outdoors and indoors.
type:
ARDEX FB pouring resin consists of the gray epoxy resin component F and the clear hardener component B.
For processing, the two quantitatively balanced components are thoroughly mixed.
Processing time: approx. 90 minutes at temperatures of + 18 ° C to 20 ° C.
Mechanical load capacity: after approx. 24 hours.
Technical data according to ARDEX quality standard:
Mixing ratio: according to container contents
Weight of the ready-to-use mortar: approx. 1.5 kg / l
Material needed:
The material requirements depend on the width and depth of the cracks, joints and boreholes and can be up to 300 g per meter.
As bonding layer approx. 1kg / m2 ARDEX FB casting resin is required.
processing time
(+ 20 ° C): approx. 90 min.
Mechanical loadable: after 1 day
Compressive strength: approx. 40 N / mm2 after 1 day
after 3 days approx. 50 N / mm2
after 7 days approx. 55 N / mm2
after 28 days approx. 65 N / mm2
Bending tensile strength: after 1 day approx. 25 N / mm2
after 3 days approx. 30 N / mm2
after 7 days approx. 35 N / mm2
after 28 days approx. 35 N / mm2
containers:
Can 1kg