SIGMA COATINGS

Polymatt

High-quality, twice-covering plastic emulsion paint for the interior. Hygienic room air due to solvent and plasticizer-free receipt, low emissions and tested for harmful substances according to TÜV-Nord and WKI Fraunhofer Institute. For high-quality, highly durable new and renovation coatings on all common surfaces in living and working areas such as Woodchip, textured, nonwoven or glass fabric wallpaper, synthetic resin plasters, plaster of classes MG PII - PIV, gypsum plaster boards and the like. Excellent for stressed wall surfaces indoors, which allow for time and cost reasons, only one recoating.
 

•     twin coverage
•     Excellent whiteness
•     perfectly hygienic
•     highly diffusible
•     low stress
•     texture preserving

Colour shade:

White


Density:

1.45g / cc


Consumption:

Approx. 130 ml / m² per coating on a smooth surface. Exact consumption by testing coating determined.


Drying time:

after 4 hours repaintable based on 20 ° C and 65% rel. humidity


Data according to norm DIN EN 13 300:

Wet abrasion:

Class 1, matches abrasion resistance according to norm DIN 53 778.

Contrast ratio:

Coverage class 1, with a range of 8 m² / ltr.

Gloss level:

matt

Maximum grain size:

fine (<100 μm)


Shelf life:

cool and frost-free. Shelf life: approx. 12 months in unopened original container

Einstufung gemäß der Verordnung (EG) Nr. 1272/2008 [CLP/GHS]
Produkt ist nicht als gefährlich eingestuft gemäß der Verordnung (EG) 1272/2008 und deren Änderungen.

SIGMA COATINGS

Polysatin SG

High-quality, semi-gloss plastic dispersion paint for the interior. Non air pollutant due to solvent and plasticizer-free receip, low emissions and tested for harmful substances according to TÜV-Nord and WKI Fraunhofer Institute. For highly durable new coatings and renovation paints with a silky finish. Can be used on all common surfaces in living and working areas, such as Woodchip, textured, nonwoven or glass fabric wallpaper, synthetic resin plasters, plaster of the MG PII - PIV, gypsum plaster boards and the like. Excellent for highly stressed wall surfaces in hospitals, schools, kindergartens etc. For coatings that should not release odoriferous substances after drying.

 

•     good covering characteristics
•     very easy to process
•     very high whiteness
•     perfectly clean air(test certificate)
•     free of fogging active components
•     highly diffusible
•     texture preserving
•     resistant to aqueous disinfectants (test certificate)

Colour shade:

White


Density:

1.34 g / cc


Consumption:

Approx. 120 ml / m² per coating on a smooth surface. Exact consumption has to be determined by test coating.


Drying time:

after 4 hours repaintable based on 20 ° C and 65% rel. humidity


Characteristics according to norm DIN EN 13 300:

Wet abrasion:

Class 1, matches abrasion resistant according to norm DIN 53 778.

Contrast ratio:

covering class 2, with a range of 8 m² / ltr.

Gloss level:

satin gloss

Maximum grain size:

fine (<100 μm)


Shelf life:

cool and frost-free. Shelf life: approx. 12 months in unopened original container


The indicated characteristics refer to the untinted product. By tinting deviations are possible.

SIGMA COATINGS

Polysatin SM

High-quality, semi-gloss plastic dispersion paint for indoors. Clean ambient air due to solvent and plasticizer-free receipt, low emissions and tested for harmful substances according to TÜV-Nord and WKI Fraunhofer Institut. For highly durable new and renovation coatings with a satin finish. Can be used on all common surfaces in living and working areas such. Woodchip-wallpaper, textured, nonwoven or glass fabric wallpaper, synthetic resin plasters, plaster of classes MG PII - PIV, gypsum plaster boards and similar. Excellent for hospitals, medical practices, as resistant to disinfectants (test certificate available).
 

•     excellent coverage characteristics
•     very easy applicate
•     very high schade of whiteness
•     non air polluting (test certificate)
•     free of fogging active components (test certificate)
•     highly diffusible
•     structure preserving
•     resistant to aqueous disinfectants (test certificate)

Colour shade:

White


Density:

1.34 g / cc


Consumption:

Approx. 120 ml / m² per coating on a smooth surface. Determine exact consumption by test.


Drying time:

after 4 hours repaintable based on 20 ° C and 65% rel. humidity


Characteristics according to norm DIN EN 13 300:

Wet abrasion:

Class 1, abrasion resistant matches norm DIN 53 778.

Contrast ratio:

Covering class 2, with a range of 8 m² / ltr.

Gloss level:

satin gloss

Maximum grain size:

fine (<100 μm)


Shelf life:

cool and frost-free. Shelf life: approx. 12 months in unopened original container

SIGMA COATINGS

Silky latex paint

Efficient, semi-gloss plastic dispersion paint for indoors. Hygienic room air due to solvent- and plasticizer-free as well as low polluting and low-emission receipt.


Characteristics:

- solvent and plasticizer free

- clean room air

- Free from fogging active ingredients

- resistant to aqueous disinfectants

- good covering characteristics

- Easy to process

- preserving the texture

- low tension

- diffusible


Usage:

For textur-preserving, highly durable new and renovation coatings on all indoor surfaces. Particularly suitable for painting over woodchip wallpaper, textured, nonwoven or glass fabric wallpaper, synthetic resin plaster.


Color shade:

White


Bucket size:

5L / 12,5L


Density:

1.32 g / cc

Consumption:

Approximately 140 ml / m2 per coating on a smooth surface.

Drying Time:

After 4 hours repaintable based on 20 ° C and 65% rel. humidity


Characteristics according to norm DIN EN 13 300:

Wet abrasion:

Class 1, matches abrasion resistant according to norm DIN 53 778

Contrast ratio:

coverage class 2, at a range of 7.5 m2 / ltr.

Gloss level:

satin gloss

Maximum grain size:

Fine (<100 μm)

SÜDWEST^®

Bio-InnenSilikat

Application:

Pollutant - tested, preservative - free, matt silicate paint (according to norm DIN 18363 2.4.1 with an organic content <5%) with very good covering characteristics for heavily stressed wall surfaces indoors.

Can be applied to matt dispersion paints or surfaces painted with the SÜDWEST primer.

Can be used in food processing plants (according to current appraisals). Resistant to surface disinfectant (according to current appraisals). Tested and certified according to the natureplus guidelines - meets the strictest environmental and health requirements.

Color shade:

9110 White


Consumption:

140 ml / m² per coat

Depending on the absorbency and roughness of the substrate, a different consumption can occur.


Water vapor diffusion sd value:

<0,06 m (class V1 high) according to EN ISO 7783-2.


Data according to norm DIN EN 13300:

1. Wet abrasion class 2

2. Gloss level matt

3. Contrast ratio class 1 at 8 m² / l

4. Maximum grain size fine (<100μm)

5. Density about 1.4 g / cm³

Product code: M-SK 01

SÜDWEST^®

Profi XXL

Super bright walls with one paint coat!

Profi XXL impresses with an extraordinary covering performance, combined with a high shade of whiteness, and comes with outstanding processing characteristics. Brilliant results with only one paint coat.

The efficient professional one-coat-paint stands for the highest quality and efficiency. In particular, ProfiXXL is conform to the growing environmental and health awareness.


Color shade:

White (RAL code 9110)


Consumption:

140 ml / m² per coat

Absorbency and roughness of the surface can occur a different consumption.


Technical data:

1. Wet abrasion class 3

2. Level of gloss dull mat

3. Contrast ratio Class 1 at a range of 7 m² / l

ARDEX PANDOMO^® W1 2.0

Decor spatula / white

For the design of wall and ceiling surfaces in the interior.

Cement plastic base.

Hardens and dries quickly, low stress and crack-free at all coating thicknesses.

Easy to process.

Excellent adhesion.

Very efficient.


Application:

Creation of representative design-surfaces, e.g. in exhibition rooms, foyers, public buildings, sales areas and in private residential areas.

type:

White powder made of special cements, elastic plastic powders, selected fillers and special additives.

The powder is stirred with water to a supple mass, which can be easily applicated also in thin and thick layers and can be processed for approx. 30 minutes before drying.

Dried layers are low-stress and diffusion-free.

PANDOMO® W1 is non-corrosive.

SIGMA COATINGS / PPG

SIGMA Resist Clean matt

SIGMA Resist Clean Matt is a matte, non-soiling, easily cleanable paint for wall and ceiling coatings in all private and commercial properties that are heavy stressed. Hygienic room air due to solvent and plasticizer-free and low-emission and low-emission receipt.


Characteristics:

- Perfect and easy to clean because of the DIRT RESIST TECHNOLOGY

- robust, insensitive coating surface

- Cleaning without visible change of the coating

- resistant to aqueous disinfectants

- solvent and plasticizer free.

- hygienic room air

- free from fogging-active substances

- very easy processing

- diffusible


Application:

Particularly suitable for matt, easily cleanable coatings in private homes, schools, kindergartens, hotels, restaurants, high traffic authorities, public buildings, offices, event halls and exhibition halls, etc.

For new and recoatings, on all indoor surfaces such as e.g. Woodchip, textured, nonwoven or glass fabric wallpaper, synthetic resin plaster, MG PII - PIV plasters, gypsum plasterboard.


Color shade:

White


Density:

1.293 g / cm³


Consumption:

approx. 118 ml / m² per coating on a smooth surface. Exact consumption by testing coating determined.


Drying process:

after 4 hours paintable based on 20 ° C and 65% rel. Humidity.

The final hard-wearing and cleanability is reached after a period of 28 days.


Characteristics according to DIN EN 13 300:

Shine:

Frosted

Obviously, visually, depending on the viewing angle and subject conditions, the surface may appear in a silky sheen.

Maximum grain size:

Fine (<100 μm)

Wet abrasion:

Class 1, corresponds to abrasion resistant according to DIN 53 778

Contrast ratio:

covering characteristics class 2, with a yield of 8.5 m² / ltr.


Package size:

2.5 / 5L / 10L bucket

Einstufung gemäß der Verordnung (EG) Nr. 1272/2008 [CLP/GHS]
Nicht eingestuft.
Das Produkt ist nicht als gefährlich eingestuft gemäß der Verordnung (EG) 1272/2008 und deren Änderungen.
Keine besonderen Wirkungen oder Gefahren bekannt.
Ergänzende Kennzeichnungselemente:
Enthält 1,2-Benzisothiazol-3(2H)-on und 2-Methyl-2H-isothiazol-3-on. Kann allergische Reaktionen hervorrufen.
Allgemein :
Darf nicht in die Hände von Kindern gelangen. Ist ärztlicher Rat erforderlich,
Verpackung oder Kennzeichnungsetikett bereithalten.