ARDEX A950

Flexible compound, grey

• with ARDURAPID® effect
• Contains cement
• Smoothing and leveling of wall and ceiling surfaces, before laying tiles and other coverings
• Leveling of floor surfaces before laying tiles and slabs
• Hardens and dries quickly
• Low tension, even in thick layers
• Excellent filling caracteristics
• High range through lightweight filler, grain size up to 1mm
• Easy to process

Application:

Mending and filling of wall and ceiling surfaces, filling of larger depressions, pruning and embedding of deep eruptions - for the absorption of tiles and other coverings. Leveling of floor surfaces before laying tiles and slabs.

For indoor application.


Type:

Gray powder made from special cements and highly dispersible plastics as well as with selected lightweight fillers. The powder is mixed with water to a smooth, stable mortar, which can be easily applicated in a thick and thin layer and hardened after about 60 minutes. The mortar is low in stress and permeable to diffusion after drying.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

Wall: approx. 7.75 l of water: 25 kg of powder

corresponding to about 1 RT of water: 3 RT powder

Soil: approx. 8.75 l of water: 25 kg of powder

corresponding to about 1 RT of water: 2.5 RT powder

Bulk weight: approx. 1.1 kg / l

Fresh weight of the mortar: approx. 1.4 kg / l

Material requirement: approx. 1.1 kg of powder per m2 and mm

Processing time (+ 20 ° C): approx. 30 - 40 min.

Applying tiles (+ 20 ° C): after approx. 2 - 3 hours

Preparation of natural stone (+ 20 ° C): after approx. 1 day

Painting and gluing work (+ 20 ° C): after approx. 1day

Compressive strength: approx. 6 N / mm2 after 1 day

after 7 days about 11 N / mm2

after 28 days approx. 14 N / mm2

Bending tensile strength: after 1 day approx. 2 N / mm2

after 7 days approx. 3 N / mm2

after 28 days approx. 4 N / mm2

pH value: fresh mortar containing cement = approx. 12


Package:

25kg bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008

Signalwort Gefahr
Gefahrenhinweise
H315 Verursacht Hautreizungen.
H318 Verursacht schwere Augenschäden.
Sicherheitshinweise
P102 Darf nicht in die Hände von Kindern gelangen.
P280 Schutzhandschuhe tragen. Augenschutz tragen.
P262 Nicht in die Augen,  auf die Haut oder auf die Kleidung gelangen lassen.
P337+313 Bei anhaltender Augenreizung: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.
P402 An einem trockenen Ort aufbewahren.
Zusätzliche Sicherheitshinweise
P305+351+338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser  spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

ARDEX AF130

Project adhesive for resilient coverings

Especially safe bond properties with ARDEX fillers designed for odor-free characteristics and clean room air.

Application:

Dispersion adhesive for bonding:

- PVC coverings

- CV coverings

- PVC - Design - Coverings (LVT)

on absorbent surfaces, floor, interior.

type:

Composition: polystyrene copolymer dispersions, polyacrylate, dispersions, rosin resin derivatives, mineral fillers, water, additives and preservatives: isothiazolinone.


Package size:

Bucket 13kg

Einstufung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Nicht eingestuft

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]

Sicherheitshinweise (CLP) : P102 - Darf nicht in die Hände von Kindern gelangen
EUH Sätze : EUH208 - Enthält Reaktionsprodukt aus: 5-Chlor-2-methyl-2H-isothiazol-3-on [EG nr. 247-500-
7] und 2-Methyl-2H-isothiazol-3-on [EG nr. 220-239-6] (3:1), 1,2-Benzisothiazol-3(2H)-on. Kann
allergische Reaktionen hervorrufen

ARDEX AF140 premium

Fibre reinforced luxury vinyl tile adhesive

• Wet adhesive with wide range of applications
• Excellent surface wetting
• Fiber reinforcement minimizes indentation resistance
• High initial adhesion
• Very low emission
• Odorless after drying
• Solvent-free according to TRGS 610

Application:

Indoor. Floor.


Dispersion adhesive for bonding in wet bed process:

 

•      PVC design coverings in tiles or plank formats
•      PVC and PVC composite coverings in panels
•      Linoleum flooring
•      Rubber coverings in webs and sheets up to 4 mm layer thickness

on absorbent surfaces.


ARDEX PREMIUM AF 140 is characterized by its universal applicability, well adhesion spectrum and good initial and final strength.



type:

Composition: Polystyrene copolymer dispersions, polyacrylate dispersions, rosin resin derivatives, mineral fillers, water, additives and preservatives: isothiazolinone.


Package size:

Bucket 12kg

Einstufung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Nicht eingestuft

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]

Sicherheitshinweise (CLP) : P102 - Darf nicht in die Hände von Kindern gelangen
EUH Sätze : EUH208 - Enthält Reaktionsprodukt aus: 5-Chlor-2-methyl-2H-isothiazol-3-on [EG nr. 247-500-
7] und 2-Methyl-2H-isothiazol-3-on [EG nr. 220-239-6] (3:1), 1,2-Benzisothiazol-3(2H)-on. Kann
allergische Reaktionen hervorrufen

ARDEX AF155

Special adhesive for resilient coverings

• Wide range of applications
• Long time of stickiness
• Very economic consumption
• Very low emission

Scope of application:

Indoors. Floor and wall.

Dispersion adhesive for bonding wall and floor coverings such as:


- PVC - coverings

- CV - coverings

- PVC design coverings (LVT)

- Quartz vinyl plates

- Rubber flooring up to 2.5 mm thick

- textile floor coverings with textile, latex, PVC or PUR backings

- on absorbent and non-absorbent surfaces indoors.


ARDEX AF 155 is characterized by the universal applicability in the

Wet bed and pressure-sensitive adhesive phase.


type:

Composition: polystyrene copolymer dispersions, polyacrylate, dispersions, rosin resin derivatives, mineral fillers, water, additives and preservatives: isothiazolinone.


Package size:

Bucket 11kg

Einstufung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Nicht eingestuft
Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen.
EUH Sätze:EUH208 - Enthält Reaktionsprodukt aus: 5-Chlor-2-methyl-2H-isothiazol-3-on [EG nr. 247-500-7] und 2-Methyl-2H-isothiazol-3-on [EG nr. 220-239-6] (3:1), 1,2-Benzisothiazol-3(2H)-on. Kann allergische Reaktionen hervorrufen.EUH210.

ARDEX AF230

Fast carpet adhesive

• Wide range of applications for textile floor coverings

• Good initial adhesive

• Very low emission


Application:

Indoors, Floor.

Dispersion adhesive for bonding:


- Textile coverings with textile backings, latex foam or latex backings

- Woven textile coverings

- Needle felt coverings on absorbent substrates.


ARDEX AF 230 has a wide range of applications, good initial and final strength.

type:

Composition: polystyrene copolymer dispersions, polyacrylate, dispersions, rosin resin derivatives, mineral fillers, water, additives and preservatives: isothiazolinone.


Package size:

Bucket 13kg

Einstufung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Sensibilisierung der Haut, Kategorie 1 H317
Chronisch gewässergefährdend, Kategorie 3H412
Volltext der Gefahrenhinweise: Siehe Abschnitt 16
Schädliche physikalisch-chemische Wirkungen sowie schädliche Wirkungen auf die menschliche Gesundheit und die Umwelt
Nach unserem Kenntnisstand birgt dieses Produkt bei Einhaltung guter Arbeitshygiene keine besonderen Risiken.

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP) :

GHS07
Signalwort (CLP) : Achtung
Gefährliche Inhaltsstoffe : Phenol, styrolisiert
Gefahrenhinweise (CLP) : H317 - Kann allergische Hautreaktionen verursachen.
H412 - Schädlich für Wasserorganismen, mit langfristiger Wirkung.
Sicherheitshinweise (CLP) : P280 - Schutzhandschuhe, Augenschutz tragen.
P333+P313 - Bei Hautreizung oder -ausschlag: Ärztlichen Rat einholen/ärztliche Hilfe
hinzuziehen.
P102 - Darf nicht in die Hände von Kindern gelangen.

ARDEX PREMIUM AF460 MS

Elastic SMP-adhesive

•     Approved by building authorities
•     Parquet adhesive metches norm DIN 14293
•     Solvent and water-free
•     Ready to use, 1-component
•     Elastic and mild to surface
•     No priming necessary
•     Easy to spread
•     Fast development of strength

Application:

Indoor and outdoor.

For the force-fit connection of cracks, dummy joints and breakouts. As an adhesive for nail rails, rails and profiles made of metal, wood and natural stone and artificial stone and other compatible materials.

As an adhesive for various floor coverings, such as parquet, laminate etc. The suitability must be ensured before.

Suitable for screeds and sreeds with integrated heating elements.



type:

Silane-modified polymer which is cured by reaction with moisture.


Material requirements:

approx. 800 - 1500g / m² depending on the used spatula


Verbeitungsbedingungen:


Open time:

approx. 40 minutes


setting time:

approx. 24 - 48 hours


Surface treatment:

earliest after 24 hours


Storage time:

approx. 12 months in the original sealed container



containers:

Bucket 18kg

ARDEX PREMIUM AF480 MS

Firmly elastic SMP-adhesive

•     Approved by building authorities
•     Parquet adhesive matches norm DIN 14293
•     wide range of applications
•     Combines the advantages of shearing strength and elastic adhesives
•     Solvent- and water-free
•     Ready to use, 1-component product
•     No priming necessary
•     Easy to spread
•     Fast development of strength and high strength at end of drying
•     Minimizes the risk of break-off joints

Application:

Indoor. Floor.

Firmly elastic SMP adhesive for bonding of:

- High-edge parquet according to DIN EN 14761, 16 mm thick, max. 200 mm long

- Wide lamella, module block DIN EN 14761, solid parquet, parquet straps according to DIN EN 13226

- Multi-layer parquet according to DIN EN 13489

- Solid wood flooring according to DIN EN 13629 and DIN EN 13990, 18 cm width, thickness / size ratio 1: 8

- Mosaic parquet according to DIN EN 13488

- Solid wood parquet according to DIN EN 13227

- Flat cork coverings according to DIN EN 12104

- cork flooring with HDF / MDF middle layer and cork backing according to DIN EN 12104

- ARDEX Impact sound insulation and decoupling plates on suitable, absorbing and non-absorbing surfaces indoors


Type:

Silane-modified polymer which hardens with moisture.



Material requirements:

approx. 800 - 1500g / m² depending on the slotted putty



Processing conditions:


Processing period:

approx. 40 minutes


setting time:

approx. 24 - 48 hours


Surface preparation:

earliest after 24 hours, non-absorbing surfaces after 48 hours.


Storage time:

approx. 12 months in the stock sealed container



Package:

Bucket 18kg

ARDEX AF800

Universal Tackifier

• Wide range of applications

• Very efficient

• Good adhesive characteristics

• Water-removable

• Very low emission


Scope of application:

Adhesive, water-soluble, rollable and trowellable fixation for fixing of:


- textile coverings with fleece backing

- textile coverings with textile backings

- textile coverings with foam backing

- CV coverings

- ARDEX DS 40 sound insulation and decoupling material


on absorbent surfaces and on existing coverings.


ARDEX AF 800 is characterized by its very long processability, high tack and good water emulsifiability.



type:

Polymer dispersions, natural resin, mineral fillers, water, additives and preservatives: isothiazolinone


Package size:

Bucket 10kg

ARDEX AM100

Levelling mortar

Based on cement.

Leveling, repairing and plastering wall surfaces in thin and thick layers indoor, outdoor and underwater.

Creation of height compensating layers and reparing of floor surfaces made of concrete and cement screed for the preparation before tiling.

2 hours after processing ready for tiling.

Low stress, water and weather resistant, easy to process, smoothing.

Layer thicknesses of 5 to 50 mm possible.


Applikation:

Indoor and outdoor. Wall and floor.

- Leveling, repairing and plastering of concrete wall surfaces

- masonry (except aerated concrete)

- plaster of mortar classification PII and PIII



containers:

25kg bag

ARDEX AR300

Multimortar

On cement basis

Indoors and outdoors. Wall and floor.

Low-tension, waterproof and weatherproof, easy to procett, smoothable with putty and felt-tool.


Application:

Building of mineral building boards, gypsum plaster boards, hard foam insulation boards with mortar lamination, etc.

Leveling, filling and plastering of wall and floor surfaces in layer thicknesses of 2 - 30 mm before tiling.

Filling holes, indentations, slots, and outbursts.

Bonding of facing blocks made of aerated concrete and sand-lime brick in static non-relevant areas, such as bathtub and washbasin wall linings, Duschabtrennungen u.ä.

Bonding of stoneware and stoneware tiles with quick initial adhesion and walkability.