SIGMA COATINGS

Polysatin SG

High-quality, semi-gloss plastic dispersion paint for the interior. Non air pollutant due to solvent and plasticizer-free receip, low emissions and tested for harmful substances according to TÜV-Nord and WKI Fraunhofer Institute. For highly durable new coatings and renovation paints with a silky finish. Can be used on all common surfaces in living and working areas, such as Woodchip, textured, nonwoven or glass fabric wallpaper, synthetic resin plasters, plaster of the MG PII - PIV, gypsum plaster boards and the like. Excellent for highly stressed wall surfaces in hospitals, schools, kindergartens etc. For coatings that should not release odoriferous substances after drying.

 

•     good covering characteristics
•     very easy to process
•     very high whiteness
•     perfectly clean air(test certificate)
•     free of fogging active components
•     highly diffusible
•     texture preserving
•     resistant to aqueous disinfectants (test certificate)

Colour shade:

White


Density:

1.34 g / cc


Consumption:

Approx. 120 ml / m² per coating on a smooth surface. Exact consumption has to be determined by test coating.


Drying time:

after 4 hours repaintable based on 20 ° C and 65% rel. humidity


Characteristics according to norm DIN EN 13 300:

Wet abrasion:

Class 1, matches abrasion resistant according to norm DIN 53 778.

Contrast ratio:

covering class 2, with a range of 8 m² / ltr.

Gloss level:

satin gloss

Maximum grain size:

fine (<100 μm)


Shelf life:

cool and frost-free. Shelf life: approx. 12 months in unopened original container


The indicated characteristics refer to the untinted product. By tinting deviations are possible.

SIGMA COATINGS

Polysatin SM

High-quality, semi-gloss plastic dispersion paint for indoors. Clean ambient air due to solvent and plasticizer-free receipt, low emissions and tested for harmful substances according to TÜV-Nord and WKI Fraunhofer Institut. For highly durable new and renovation coatings with a satin finish. Can be used on all common surfaces in living and working areas such. Woodchip-wallpaper, textured, nonwoven or glass fabric wallpaper, synthetic resin plasters, plaster of classes MG PII - PIV, gypsum plaster boards and similar. Excellent for hospitals, medical practices, as resistant to disinfectants (test certificate available).
 

•     excellent coverage characteristics
•     very easy applicate
•     very high schade of whiteness
•     non air polluting (test certificate)
•     free of fogging active components (test certificate)
•     highly diffusible
•     structure preserving
•     resistant to aqueous disinfectants (test certificate)

Colour shade:

White


Density:

1.34 g / cc


Consumption:

Approx. 120 ml / m² per coating on a smooth surface. Determine exact consumption by test.


Drying time:

after 4 hours repaintable based on 20 ° C and 65% rel. humidity


Characteristics according to norm DIN EN 13 300:

Wet abrasion:

Class 1, abrasion resistant matches norm DIN 53 778.

Contrast ratio:

Covering class 2, with a range of 8 m² / ltr.

Gloss level:

satin gloss

Maximum grain size:

fine (<100 μm)


Shelf life:

cool and frost-free. Shelf life: approx. 12 months in unopened original container

SIGMA COATINGS

Crackprimer 5 in 1

Universal, crack reinforcing special primer for indoors and outdoors.


Characteristics:

- remineralizing

- ideal bonding bridge for all elastic substrates

- fiber-reinforced

- crack reinforcing (class A1 according to norm DIN EN 1062-7)

- optimal alternative to elastic systems

- highly permeable to water vapor

- structure smoothing

- very good filling

- good covering characteristics

- very easy processing

- water dilutable

- can be repainted with dispersion and silicone resin paints


Usage:

Water-dilutable, pigmented special coating for remineralizing, adhesion-promoting, crack-bridging, fiber-reinforcing and structurally-leveling base and intermediate coatings. Excellent for all load-bearing substrates such as old dispersion and elastic paints, silicate, silicone and synthetic resin plasters, concrete, mineral plasters, ETICS systems, except MG PI, etc. Can be repainted with all SIGMA dispersion coatings based on dispersion and silicone resins.


Color shade:

White

Packing unit:

20kg


Density:

1.50 g / cc

Consumption:

Approximately 400 g / m2 with a structure-free surface,

up to approx. 800 g / m2 for structured substrates.

Drying time:

Can be painted over after 24 hours (+20 ° C / 65% relative humidity).


Characteristics according to norm DIN EN 1062:

Gloss level:

Matt / G3

Max. Grain size:

<1500 μm / S3

Water vapor permeability (sd value):

<0.14 m (high) / V1

Water permeability (w value):

 <0.1 [kg / (m 2 .h 0.5)] (low) / W3

SIGMA COATINGS

Silky latex paint

Efficient, semi-gloss plastic dispersion paint for indoors. Hygienic room air due to solvent- and plasticizer-free as well as low polluting and low-emission receipt.


Characteristics:

- solvent and plasticizer free

- clean room air

- Free from fogging active ingredients

- resistant to aqueous disinfectants

- good covering characteristics

- Easy to process

- preserving the texture

- low tension

- diffusible


Usage:

For textur-preserving, highly durable new and renovation coatings on all indoor surfaces. Particularly suitable for painting over woodchip wallpaper, textured, nonwoven or glass fabric wallpaper, synthetic resin plaster.


Color shade:

White


Bucket size:

5L / 12,5L


Density:

1.32 g / cc

Consumption:

Approximately 140 ml / m2 per coating on a smooth surface.

Drying Time:

After 4 hours repaintable based on 20 ° C and 65% rel. humidity


Characteristics according to norm DIN EN 13 300:

Wet abrasion:

Class 1, matches abrasion resistant according to norm DIN 53 778

Contrast ratio:

coverage class 2, at a range of 7.5 m2 / ltr.

Gloss level:

satin gloss

Maximum grain size:

Fine (<100 μm)

SIGMA COATINGS

Silicat Fix Aqua Fixation

(former Silicate concentrate primer)

Solvent-free, water-dilutable primer and diluent based on silicate according to VOB / C, norm DIN 18363 section 2.4.1, for indoors and outdoors.


Characteristics:

- solidifying and absorbing deeply

- silicifies with the substrate

- highly permeable to water vapor

- not film-forming

- Concentrate, dilutable with water until 1: 1

- solvent-free

- water dilutable

- environmentally friendly, biologically harmless


Usage:

For the priming of sandy, porous, strongly absorbent or unevenly absorbent mineral substrates and viable old coatings.



Color shade:

clear

Packing unit:

10L

Density:

1.10 g / cc

Consumption:

Approximately 100-250 ml / m² depending on the condition and absorbency of the substrate.

Drying time:

Can be painted after 12 hours (+ 20 ° C / 65% relative humidity).

SIGMA COATINGS

Siloxane fascade paint

SIGMA siloxane facade paint with PROTECS technology based on silicone resin emulsion, for optimally protected facades due to the new compact molecular structure of the binder. With preventive protection film against algae and fungus.


Characteristics:

- excellent dirt repellent

- density against wind driven rain

- High water vapor and carbon dioxide permeability

- low tension

- easy processing

- easily recoatable

- not film-forming



Usage:

For high-quality facade coatings, which have optimized dirt-repellent requirements. Can be used on almost all mineral surfaces. Excellent for renovating composite thermal insulation systems and historical buildings.


Color shade:

White

 

Bucket size:

2.5 / 5L


Density:

Approximately 1.71 g / cc


Consumption:

Approximately 150 ml / m2 per coating on a smooth surface. Exact consumption by testing coating determined.


Drying time:

Can be painted over after 6 hours (+20 ° C / 65% relative humidity).

At high humidity and / or low temperature the drying time is delayed.


Characteristics according to norm DIN EN 1062:


Gloss level:

Matt G3

Dry film thickness> 100 - 200 μm E3

Max. Grain size:

<100 μm S1

Water vapor permeability (sd value):

<0.14 m (high) V1

Water permeability (w value):

<0.1 [kg / (m2 · h 0.5)] (low) W3

SIGMA COATINGS

Siloxane priming sealer

Solvent-based, consolidating primer based on silicone resin combination for outdoors.


Characteristics:

- deep absorbtion

- good, solidifying properties

- capable of diffusion and sorption

- water repellent


Usage:

For preparing crumbly, sanding and highly absorbent mineral substrates for combinations with SIGMA siloxane system materials. Also suitable for the hardening of weathered coatings, as far as there is still sufficient substrate adhesion.

 

Color shade:

Clear

Packing unit:

10L

Density:

0.83 g / cc

Consumption:

Approximately 150-250 ml / m² depending on condition and absorbency of the substrate.

Drying time:

After 12 hours paintable at 20 ° C and 65% rel. Humidity.

SIGMA COATINGS

Siloxan primer

Water thinnable, solidifying primer based on silicone resin emulsion for outdoors.



Characteristics:

- excellent priming effect

- water repellent

- efficient

- water dilutable up to 1: 1

- environmentally friendly


Usage:

For the priming of heavily absorbant or non-uniformly absorbent substrates for combinations with SIGMA siloxane system materials.

Excellent leveling and reduction of absorbency and solidification of substrates. Particularly suitable for mineral plasters, firmly adhering, slightly weathered old coatings as well as external thermal insulation systems.


Color Shade:

Clear

Packing unit:

10L

Density:

1.07 g / cc

Consumption:

Approximately 100-200 ml / m² depending on condition and absorbency of the substrate.

Drying time:

After 8 hours paintable at 20 ° C and 65% rel. Humidity.

SIGMA COATINGS

Sol silicate fascade paint

SIGMA Sol silicate fascade paint is a high-quality, highly diffusible silicate paint which is

Silica sol / water glass based. Matches the requirements of VOB / C, norm DIN 18363 section 2.4.1.


Characteristics:

- versatile applicable

- excellent adhesion

- Certified for historical buildings

- weather resistant

- High water vapor and CO2 permeability

- highly water repellent

- Easy to process

- lighresistant pigmented

- UV stable and alkali resistant

- non-thermoplastic, low tendency to fouling

- free of solvents and plasticizers

- mineral matt


Usage:

For high-quality coatings and renovation coatings of load-bearing, silicate-, dispersion- and silicone-resin-bound paints and plasters as well as for mineral substrates of the mortar groups PIc, P II and P III. Expertly tested and suitable for the renovation of old buildings and historic buildings.



Color shade:

White

Bucket size:

5 / 12.5L

Density:

Approximately 1.55 g / cc

Consumption:

Approximately 200 ml / m2 per coating on a smooth surface. Exact consumption determined by test coating.

Drying time:

Surface dry after approx. 4 hours, recoatable after approx. 8 hours, completely dried after approx. 7 days, based on + 20 ° C. and 65% rel. Humidity.

At high humidity and / or low temperature the drying time is delayed.



Characteristics according to norm DIN EN 1062:


Gloss level:

Matt G3


Dry film thickness> 100 - 200 μm E3

 

Max. Grain size:

<100 μm S1

 

Water vapor permeability (sd value):

<0.14 m (high) V1

 

Water permeability (w value):

<0.1 [kg / (m2 · h 0.5)] (low) W3

SIGMA COATINGS

SIGMASCAN SC110 Fiberglass fabric wallpaper

Highly durable, texture generating interior wallcovering.

•      rot resistance
•      protects shock- and stress-sensitive substrates
•      moisture-resistant, do not swell
•      non-flammable
•      highly durable
•      dimensionally stable, non-sliding

Highly durable, texture generating wall covering for indoors based on glass fibers with a strong modified finish. For all common surfaces such as plaster (except lime plaster), gypsum plasterboard and plaster blocks, plasterboard, chipboard, as well as smoothed by spatula building materials including old load-bearing coatings. Especially suitable for heavily stressed interior wall surfaces, e.g. in hospitals, nursing homes, hotels, schools, kindergartens, offices, staircases, apartments, etc.


Mass:

123g / m²


Role:

50m