MEYER - Umweltgerechte Profiqualität

Tiefgrund Markrylat LF

Tightening, highly diffusable.

Characteristics:

Solvent-free, ready-for-use primer with good permeation characteristics, reduces high absorbency of the surface, has a tightening effect, is weather-resistant,

Breathable, quick-drying as well indoor and outdoor.


Application:

For the reliable consolidation of all the common (indoor either outdoor) sanding, chalky or too strongly absorbing surfaces, such as sand-lime brick, concrete, asbestos cement boards, plaster surfaces and similar applications. Particularly suitable for all gypsum-containing surfaces; as well as for the consolidation of washed distemper and rests of old lime and mineral paints.

TIERGRUND MARKRYLAT LF can be applied with a brush, a ceiling brush or a roller. Airless spraying is also suitable.

TIEFGRUND MARKRYLAT LF is ready for use and is usually processed undiluted. For weakly absorbent surfaces, dilute with water up to 1:3 ratio.



Density: 1.04

Raw material: synthetic resin-hydrosol dispersion

Solid content: approx. 12.5%

VOSSCHEMIE

G4 - Extra

ARDEX A45 FINE

Stable leveling compound from 0-20mm

• processable down to zero mm for surface finish

• On all suitable surfaces as a repair filler and smoothening filler

• Very quick drying

• Reactivatable and very easy to modelable

Scope of application:

Indoors. Floor.

Stable leveling compound for filling, leveling and trowelling:


• Leveling and repairing steps and pedestals

• filling of holes and cracks eg. in screeds or in concrete floors

• repairing of height offsets and bumps

• Fine and surface finishes


ARDEX A 45 fine is a universal leveling compound with excellent processing properties. Even after 10-15 minutes the surface can be applied and modeled.

Type:

Gray powder with special cements, selected mineral fillers and good dispersible plastics.

Package Size:

25kg

GISCODE: ZP1 = zementhaltiges Produkt, chromatarm
EMICODE: EC1 = sehr emissionsarm
Kennzeichnung nach GHS/CLP: GHS05 "ätzend"

Signalwort: Gefahr
Kennzeichnung nach GGVSEB/ADR: keine

ARDEX A828 READY

Areas and joint filler

• High stability

• levelling up to zero mm

• easy to sand

• processable with airless mashines

• Excellent adhesion without primer on many common substrates

Application:

Size:

Bucket 18kg

ARDEX PU30

1K-PU primer

ARDEX B 16

Concrete repair mortar

fibre reinforced mortal. To repair, fill holes & breaks and smooth deficient areas in concrete load-bearing elements. Protects the reinforcement from corrosion.

GUTJAHR

IndorTec FN Levelling System Starter Kit 1.5 mm

The IndorTec® FN levelling system accurately aligns tiles and slabs, including large formats. Unevenness caused by height differences is a thing of the past. Usage is extremely simple with just 3 manual operations: Push on, lock, turn to fix. IndorTec® FN anchors itself in the open joint, therefore causing no scratches or impressions whatsoever in the surface of the covering.

Advantages of the IndorTec FN

• Simple tile levelling system
  for evenly aligned floor coverings.
• Prevents raised edges and protrusions in the covering.
• Does not cause scratches or impressions
  on the covering surface.
• Uniform covering level with just 3 manual operations:
  1. Push on,
  2. Lock,
  3. Turn to fix

The Starter Kit contains:

• for joint width 1,5 mm
• 100 pull tabs
• 300 thread tabs

GUTJAHR

IndorTec FN Levelling System Starter Kit 2 mm

The IndorTec® FN levelling system accurately aligns tiles and slabs, including large formats. Unevenness caused by height differences is a thing of the past. Usage is extremely simple with just 3 manual operations: Push on, lock, turn to fix. IndorTec® FN anchors itself in the open joint, therefore causing no scratches or impressions whatsoever in the surface of the covering.

Advantages of the IndorTec FN

• Simple tile levelling system
  for evenly aligned floor coverings.
• Prevents raised edges and protrusions in the covering.
• Does not cause scratches or impressions
  on the covering surface.
• Uniform covering level with just 3 manual operations:
  1. Push on,
  2. Lock,
  3. Turn to fix

The Starter Kit contains:

• for joint width 2 mm
• 100 pull tabs
• 300 thread tabs

GUTJAHR

IndorTec FN Levelling System Starter Kit 3 mm

The IndorTec® FN levelling system accurately aligns tiles and slabs, including large formats. Unevenness caused by height differences is a thing of the past. Usage is extremely simple with just 3 manual operations: Push on, lock, turn to fix. IndorTec® FN anchors itself in the open joint, therefore causing no scratches or impressions whatsoever in the surface of the covering.

Advantages of the IndorTec FN

• Simple tile levelling system
  for evenly aligned floor coverings.
• Prevents raised edges and protrusions in the covering.
• Does not cause scratches or impressions
  on the covering surface.
• Uniform covering level with just 3 manual operations:
  1. Push on,
  2. Lock,
  3. Turn to fix

The Starter Kit contains:

• for joint width 3 mm
• 100 pull tabs
• 300 thread tabs

ARDEX X 6

Tile adhesive 

Standard adhesive for attaching and laying tiles made of earthenware, stoneware and fine stoneware as well as insulating materials.