ARDEX X78

MICROTEC Flexkleber, Boden

Cement based.

Matches the requirements of level C2 to EN 12004.

Tiling of stoneware tiles and fine stoneware, concrete and natural stone slabs indoors and outdoors.

Fiber reinforcement

- Shear stresses are compensated

- Adhesion strengths are improved

- Deformation forces are reduced

Water resistant,

frost-resistant,

flexible,

efficient unsage,

easy processing.

Bloomingless because of special additives.

Full bed method without fluid bed behavior.

ARDEX X78 + ARDEX E 90 Kunstharzvergütung = special adhesive with high formability (S2 of EN 12002) and water repellent properties.


Application:

Indoor and outdoor. Floor.

Production of a flexible adhesive bed with soft mortar consistency, which allows a fully embedding done by floating method.

Tiling of

- stoneware tiles and fine stoneware

- Mosaic of glass and porcelain

- concrete blocks

- moisture-resistant natural stone slabs

Tiling of tiles and slabs

- on balconies and terraces

- in swimming pools

- on screeds with integrated heating elements

- in high-impact industrial and commercial applications

Tiling on still shrinking concrete surfaces (at least 3 months old).

Type:

Powders with cements, fillers, special additives, MICROTEC fibers and flexible operating plastics.

Stirred with water gives a smooth and pasty adhesive mortar. The processing period is approx. 4 hours.

The adhesive hardens by hydration and drying.

ARDEX X7G PLUS

Flexible adhesive

Cement-based.

Matches the C2 requirements of norm EN 12004.

Flexible,

water resistant,

frost-resistant.

For laying and tiling of ceramic tiles, cast stone and moisture insensitive natural stone tiles indoors and outdoors.

Laying porcelain stoneware tiles.

Easy and smooth to handle to process,

high fertility,

high stability,

long processing time,

wide range of applications.


Application:

Indoors and outdoors. Wall and floor.

Laying und tiling of

- Tiles of stone and stoneware

- Mosaic of glass and porcelain

- Concrete blocks and moisture insensitive natural stone plates

- Porcelain stoneware tiles

Laying of

- suitable building panels, z. B. plasterboard

- Insulation boards made of hard foam and mineral fibers

- Tile elements (hard foam insulation boards with mortar lamination on both sides)

Slabs on heated screeds floors.

Tile laying in swimming pools.

Bonding of ceiling, sight and sound insulation panels.

type:

Powders with cements, fillers, flexible plastics and additives.

When mixed with water, a supple, pasty, solid adhesive mortar is created, which hardens through hydration and drying and after a few days is waterproof and weatherproof. ARDEX X7G PLUS adheres nearly insoluble on all suitable surfaces, such as: Concrete, cement screed, calcium sulfate screed, mastic asphalt screed, plaster, masonry, etc., and makes a firm connections.

ARDEX X90

MicroteC3 flexible adhesive

Product description


Cement-base

Blossom-free laying of tiles made of stoneware and porcelain stoneware, concrete and natural stone tiles indoors and outdoors.

Matches the ARDEX - MicroteC3 requirements


- highest frost-dew change resistance

- fast drying even at cool temperatures

- Driving rain resistance after approx. 2 hours

- Fiber reinforcement


For adhesive bed thicknesses up to 15 mm

Fully embedding without fluid bed behavior

Long processing time of 1 hour / walkable after approx. 3 hours

Very good adhesive from the beginning

Easy processing


Application


Indoors and outdoors. Wall and floor.

Making a flexible adhesive bed.

Preparation and installation of


- Tiles of stone, stoneware and porcelain stoneware

- Mosaic of glass and porcelain

- Concrete blocks

- Moisture insensitive natural stone tiles Laying tiles and slabs

- on balconies and terraces

- in swimming pools

- in heavy duty industrial and commercial areas


Preparation of ceramic facades coverings.

Laying of tiles on still shrinking concrete and masonry surfaces (at least 3 months old).

Claddings on heated screeds.

type:

Powders with cements, fillers, special additives, MICROTEC fibers and flexible plastics. When mixed with water, a smooth-pasty adhesive mortar with high stability is produced. The processing time is about 60 minutes. The mortar hardens by hydration and drying.


Material demands:

on a smooth surface:

about 1.1 kg / m² powder

with toothing 3 x 3 x 3 mm

approx. 2.1 kg / m² powder

with toothing 6 x 6 x 6 mm

about 2.6 kg / m² powder

with toothing 8 x 8 x 8 mm

approx. 3.2 kg / m² powder

with teeth 10x10x10 mm

approx. 4.6 kg / m² powder

at ARDEX Microtec toothing


processing time

(20 ° C): approx. 60 min.

placing time

(EN 1346): about 30 minutes

(measured on fresh mortar)


Package unit:

25kg paper bag

ARDEX A828 READY

Areas and joint filler

• High stability

• levelling up to zero mm

• easy to sand

• processable with airless mashines

• Excellent adhesion without primer on many common substrates

Application:

Size:

Bucket 18kg

ARDEX PU30

1K-PU primer

ARDEX CL200

•     On alpha hemihydrate basis.
•     Very low emission.
•     Production of evenly absorbent laying surfaces for the absorption of elastic and textile floor coverings as well as parquet.
•     For layer thicknesses up to 30 mm.
•     Walkable already after approx. 90 minutes.
•     Fast and high strength development.
•     Very low tension.
•     Optimal gradient properties.
•     Suitable for underfloor heating.
•     Pumpable
   

---

Enthält Portlandzement
Beschriftung Gemäss (Eg) Nr. 1272/2008

Signalwort Gefahr
Gefahrenhinweise
H315 Verursacht Hautreizungen.
H318 Verursacht schwere Augenschäden.
Sicherheitshinweise
P102 Darf nicht in die Hände von Kindern gelangen.
P280 Schutzhandschuhe tragen.
Augenschutz tragen.
P262 Nicht in die Augen, auf die Haut oder auf die Kleidung gelangen lassen.
P337+313 Bei anhaltender Augenreizung: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.
P402 An einem trockenen Ort aufbewahren.
P501 Inhalt/Behälter gemäß lokalen Vorschriften entsorgen.
Inhalt/Behälter gemäß regionalen Vorschriften entsorgen.
Inhalt/Behälter gemäß nationalen Vorschriften entsorgen.
Inhalt/Behälter gemäß internationalen Vorschriften entsorgen.
Zusätzliche Sicherheitshinweise
P305+351+338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser
spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

ARDEX B 16

Concrete repair mortar

fibre reinforced mortal. To repair, fill holes & breaks and smooth deficient areas in concrete load-bearing elements. Protects the reinforcement from corrosion.