ARDEX X32

Flexible bedding mortar

with ARDURAPID effect.

For outdoors and indoors.

Discoloration-free  and efflorescence-free laying of natural stone slabs, natural stone tiles, cast stone and cotto slabs.

Laying of stoneware and porcelain stoneware tiles.

For use in the thin, medium and thick bed method.

Leveling wall and floor surfaces.

After 3 hours walkable / jointable.

Mortar bed thicknesses from 3 to 30 mm.

Water-repellent and weather-stable, quick drying due to crystalline water binding.

Easy processing.

High efficiency.


Application:

Indoors and outdoors. Wall and floor.

Discoloration-free and efflorescence-free laying of natural stone tiles and natural stone slabs of marble, Jura marble, granite, quartzite, etc., cotto slabs and cast stone slabs.

Preparation and laying of tiles made of stoneware and porcelain stoneware.
 

Leveling of wall and floor surfaces before tiling.

Tiling on heated screeds.

Laying on still shrinking surfaces of concrete and masonry (at least 3 months old).

type:

Powder with special cements, fillers, special additives and elastic plastics.

When mixed with water, a smooth, plastic mortar is created, which hardens by hydration with crystalline water binding.

ARDEX X77

MICROTEC flex adhesive

Cement-based

Preparation and laying of tiles made of stones, stoneware and porcelain stoneware, concrete and natural stone tiles indoors and outdoors.

Reliability through fiber reinforcement

- Shear stresses are compensated

- Adhesion strengths are improved

- Deformation forces are reduced

Waterproof, frost resistant, flexible,

very efficient,

easy processing.

Efflorescence free by special additives.

ARDEX X77 + ARDEX E 90 resin coating = special adhesive with high ductility (S2 according to norm EN 12002) and water-repellent properties


Application:

Indoors and outdoors. Wall and floor.

Making a flexible adhesive surface.

Placing and laying of

- Tiles of stone, stoneware and porcelain stoneware

- Mosaic of glass and porcelain

- Concrete blocks

- Moisture insensitive natural stone tiles

preparation

- suitable building panels, z. B. plasterboard

- Insulation boards made of hard foam and mineral fibers

- Tile elements (hard foam insulation boards with mortar lamination on both sides).

Preparation and laying tiles in swimming pools.

Preparation of ceramic coverings on facades.

Preparing and laying tiles on still shrinking surfaces of concrete and masonry

(at least 3 months old).

Claddings on screeds with integrated heating elements.

type:

Powders with cements, fillers, special additives, MICROTEC fibers and flexible plastics. When mixed with water, a smooth-pasty adhesive mortar with high stability is produced. The processing time is about 60 minutes. The mortar hardens by hydration and drying.

ARDEX X78

MICROTEC Flexkleber, Boden

Cement based.

Matches the requirements of level C2 to EN 12004.

Tiling of stoneware tiles and fine stoneware, concrete and natural stone slabs indoors and outdoors.

Fiber reinforcement

- Shear stresses are compensated

- Adhesion strengths are improved

- Deformation forces are reduced

Water resistant,

frost-resistant,

flexible,

efficient unsage,

easy processing.

Bloomingless because of special additives.

Full bed method without fluid bed behavior.

ARDEX X78 + ARDEX E 90 Kunstharzvergütung = special adhesive with high formability (S2 of EN 12002) and water repellent properties.


Application:

Indoor and outdoor. Floor.

Production of a flexible adhesive bed with soft mortar consistency, which allows a fully embedding done by floating method.

Tiling of

- stoneware tiles and fine stoneware

- Mosaic of glass and porcelain

- concrete blocks

- moisture-resistant natural stone slabs

Tiling of tiles and slabs

- on balconies and terraces

- in swimming pools

- on screeds with integrated heating elements

- in high-impact industrial and commercial applications

Tiling on still shrinking concrete surfaces (at least 3 months old).

Type:

Powders with cements, fillers, special additives, MICROTEC fibers and flexible operating plastics.

Stirred with water gives a smooth and pasty adhesive mortar. The processing period is approx. 4 hours.

The adhesive hardens by hydration and drying.

ARDEX X7G PLUS

Flexible adhesive

Cement-based.

Matches the C2 requirements of norm EN 12004.

Flexible,

water resistant,

frost-resistant.

For laying and tiling of ceramic tiles, cast stone and moisture insensitive natural stone tiles indoors and outdoors.

Laying porcelain stoneware tiles.

Easy and smooth to handle to process,

high fertility,

high stability,

long processing time,

wide range of applications.


Application:

Indoors and outdoors. Wall and floor.

Laying und tiling of

- Tiles of stone and stoneware

- Mosaic of glass and porcelain

- Concrete blocks and moisture insensitive natural stone plates

- Porcelain stoneware tiles

Laying of

- suitable building panels, z. B. plasterboard

- Insulation boards made of hard foam and mineral fibers

- Tile elements (hard foam insulation boards with mortar lamination on both sides)

Slabs on heated screeds floors.

Tile laying in swimming pools.

Bonding of ceiling, sight and sound insulation panels.

type:

Powders with cements, fillers, flexible plastics and additives.

When mixed with water, a supple, pasty, solid adhesive mortar is created, which hardens through hydration and drying and after a few days is waterproof and weatherproof. ARDEX X7G PLUS adheres nearly insoluble on all suitable surfaces, such as: Concrete, cement screed, calcium sulfate screed, mastic asphalt screed, plaster, masonry, etc., and makes a firm connections.

ARDEX X90

MicroteC3 flexible adhesive

Product description


Cement-base

Blossom-free laying of tiles made of stoneware and porcelain stoneware, concrete and natural stone tiles indoors and outdoors.

Matches the ARDEX - MicroteC3 requirements


- highest frost-dew change resistance

- fast drying even at cool temperatures

- Driving rain resistance after approx. 2 hours

- Fiber reinforcement


For adhesive bed thicknesses up to 15 mm

Fully embedding without fluid bed behavior

Long processing time of 1 hour / walkable after approx. 3 hours

Very good adhesive from the beginning

Easy processing


Application


Indoors and outdoors. Wall and floor.

Making a flexible adhesive bed.

Preparation and installation of


- Tiles of stone, stoneware and porcelain stoneware

- Mosaic of glass and porcelain

- Concrete blocks

- Moisture insensitive natural stone tiles Laying tiles and slabs

- on balconies and terraces

- in swimming pools

- in heavy duty industrial and commercial areas


Preparation of ceramic facades coverings.

Laying of tiles on still shrinking concrete and masonry surfaces (at least 3 months old).

Claddings on heated screeds.

type:

Powders with cements, fillers, special additives, MICROTEC fibers and flexible plastics. When mixed with water, a smooth-pasty adhesive mortar with high stability is produced. The processing time is about 60 minutes. The mortar hardens by hydration and drying.


Material demands:

on a smooth surface:

about 1.1 kg / m² powder

with toothing 3 x 3 x 3 mm

approx. 2.1 kg / m² powder

with toothing 6 x 6 x 6 mm

about 2.6 kg / m² powder

with toothing 8 x 8 x 8 mm

approx. 3.2 kg / m² powder

with teeth 10x10x10 mm

approx. 4.6 kg / m² powder

at ARDEX Microtec toothing


processing time

(20 ° C): approx. 60 min.

placing time

(EN 1346): about 30 minutes

(measured on fresh mortar)


Package unit:

25kg paper bag

BAUKOM fabric reinforcement

ETICS-fabric

Fabric mat, fabric reinforcement, reinforcement mesh suitable for various applications.


- 165g / m²

- 4x4mm mesh size.


(Test certificate available from the manufacturer).




Size:

Roll 1mX50m (50m²)

ARDEX G10

PREMIUM flexible tile grout

• Cement based grout

• For joining ceramic tiles and slabs as well as glass mosaics, glass tiles and natural stone

• Increased color stability

• For joint widths of 1-10 mm

• Good flank adhesion

• Easy to insert with a long period of washability



Characteristics:

ARDEX G 10 PREMIUM Flex-Grout Mortar fine, has after hardening water and dirt repellent properties.

The high ductility and good flank adhesion cause a stress reduction in thermally stressed surfaces and contribute significantly to the durability of the coverings.


Scope of application:

Indoors and outdoors. Wall and floor.


For joining tiles and slabs:

- Porcelain stoneware, stoneware and earthenware

- Natural and cast stone panels

- Glass, - and glass mosaic

For joint widths of 1 - 10 mm.


type:

Cement-bound premium joint mortar with special fillers and additives for fine joint surfaces, optimum processing quality, increased color constancy, independent of the water absorption of the covering material used, as well as a long washability.


Package size:

Bucket 5 kg + Bag 12,5 kg

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]

Gefahrenpiktogramme (CLP):

Signalwort (CLP):Gefahr

Gefährliche Inhaltsstoffe:Portlandzement

Gefahrenhinweise (CLP):
H315 - Verursacht Hautreizungen.H318 - Verursacht schwere AugenschädenH335 - Kann die Atemwege reizen.

Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen.P261 - Einatmen von Staub vermeiden.P280 - Augenschutz, Schutzhandschuhe tragen.P302+P352 - BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser und Seife waschen.P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

GUTJAHR

IndorTec FN Levelling System Starter Kit 1.5 mm

The IndorTec® FN levelling system accurately aligns tiles and slabs, including large formats. Unevenness caused by height differences is a thing of the past. Usage is extremely simple with just 3 manual operations: Push on, lock, turn to fix. IndorTec® FN anchors itself in the open joint, therefore causing no scratches or impressions whatsoever in the surface of the covering.

Advantages of the IndorTec FN

• Simple tile levelling system
  for evenly aligned floor coverings.
• Prevents raised edges and protrusions in the covering.
• Does not cause scratches or impressions
  on the covering surface.
• Uniform covering level with just 3 manual operations:
  1. Push on,
  2. Lock,
  3. Turn to fix

The Starter Kit contains:

• for joint width 1,5 mm
• 100 pull tabs
• 300 thread tabs

GUTJAHR

IndorTec FN Levelling System Starter Kit 2 mm

The IndorTec® FN levelling system accurately aligns tiles and slabs, including large formats. Unevenness caused by height differences is a thing of the past. Usage is extremely simple with just 3 manual operations: Push on, lock, turn to fix. IndorTec® FN anchors itself in the open joint, therefore causing no scratches or impressions whatsoever in the surface of the covering.

Advantages of the IndorTec FN

• Simple tile levelling system
  for evenly aligned floor coverings.
• Prevents raised edges and protrusions in the covering.
• Does not cause scratches or impressions
  on the covering surface.
• Uniform covering level with just 3 manual operations:
  1. Push on,
  2. Lock,
  3. Turn to fix

The Starter Kit contains:

• for joint width 2 mm
• 100 pull tabs
• 300 thread tabs

GUTJAHR

IndorTec FN Levelling System Starter Kit 3 mm

The IndorTec® FN levelling system accurately aligns tiles and slabs, including large formats. Unevenness caused by height differences is a thing of the past. Usage is extremely simple with just 3 manual operations: Push on, lock, turn to fix. IndorTec® FN anchors itself in the open joint, therefore causing no scratches or impressions whatsoever in the surface of the covering.

Advantages of the IndorTec FN

• Simple tile levelling system
  for evenly aligned floor coverings.
• Prevents raised edges and protrusions in the covering.
• Does not cause scratches or impressions
  on the covering surface.
• Uniform covering level with just 3 manual operations:
  1. Push on,
  2. Lock,
  3. Turn to fix

The Starter Kit contains:

• for joint width 3 mm
• 100 pull tabs
• 300 thread tabs