ARDEX A38 MIX

4 hours-screed

• Made with ARDEX A 38 - 4 hour screed binder
• For the production of fast-usable and tilable cement screeds on insulating layer, on separating layer and in composite
• For repair work on cement screeds
• Ready for tiling after 4 hours for tiles, natural stone and cast stone slabs
• After 2 days ready to be laid with elastic and textile coverings as well as parquet
• Can be used indoors and outdoors
• Matches the requirements of DIN 18560 and EN 13813 (strength class CT-C35-F5)
• Processable time 60 minutes

Application:

Making cement screeds with fast accessibility and quick initial strength

- in composit

- on release layer

- on insulating layer (as floating screed)

- as screed with integrated heating
 
Repairing and renovating cement screeds before laying

- Tiles

- Natural stone and cast stone panels

- elastic and textile floor coverings

- Parquet

After approx. 4 hours, ready for laying, for tiles, natural stone and cast stone slabs.

After approx. 2 days, ready for laying for elastic and textile coverings as well as parquet.

For indoor and outdoor use.


type:

Dimensionally stable binder system with additives and special additives for almost shrinkingless and tension-free hardening and drying as well as to avoid efflorescence.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

about 1.75 liters of water: 25 kg of powder

corresponding to about 1 part water: 7.7 parts powder

Bulk weight: approx. 1.8 kg / l

Fresh weight of the mortar: approx. 2.2 kg / l

Material requirement: 22 kg powder per m2 and cm

Processing time (+20 ° C): approx. 60 min.

Accessibility (+20 ° C): after approx. 2 -3h.

Compressive strength: approx. 35 N / mm2 after 1 day

after 7 days about 40 N / mm2

after 28 days approx. 45 N / mm2

Bending tensile strength: after 1 day approx. 4.5 N / mm2

after 7 days approx. 5.0 N / mm2

after 28 days approx. 5.0 N / mm2

Floor heating suitability: yes


containers:

25kg bag

Kennzeichnung (VERORDNUNG (EG) Nr. 1272/2008)
Enthält Portlandzement
Beschriftung Gemäss (Eg) Nr. 1272/2008

Signalwort Gefahr
Gefahrenhinweise
H315 Verursacht Hautreizungen.
H318 Verursacht schwere Augenschäden.
Sicherheitshinweise
P102 Darf nicht in die Hände von Kindern gelangen.
P280 Schutzhandschuhe tragen.
Augenschutz tragen.
P262 Nicht in die Augen, auf die Haut oder auf die Kleidung gelangen lassen.
P305+351+338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser
spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P337+313 Bei anhaltender Augenreizung: Ärztlichen Rat einholen/ärztliche Hilfe
hinzuziehen.
P402 An einem trockenen Ort aufbewahren.
P501 Inhalt/Behälter gemäß lokalen Vorschriften entsorgen.
Inhalt/Behälter gemäß regionalen Vorschriften entsorgen.
Inhalt/Behälter gemäß nationalen Vorschriften entsorgen.
Inhalt/Behälter gemäß internationalen Vorschriften entsorgen.

ARDEX A38

Ready-in-4-hours screed binder

Make quick-to-use and ready for further processing cement screeds on insulation layers, separating layer or as composite layer indoors and outdoors.


After 4 hours drying ready for tiling of tiles, natural stone or concrete blocks.

After 2 days drying ready for laying elastic and textile floor coverings as well as parquet.


Dimension-controlled binder system: That means that the drying process is nearly shrinkage- and stress-free.

Matches the requirements of DIN 18560 and EN 13813 (strength classes CT-C35-F4 to CT-C45-F5).

Processing period is up to 60 minutes.


Application:

Indoor and outdoor application.

Make quick-ready and usable cement screeds

- as composit

- on seperating layer

- on insulation layer

- as screed with integrated heating elements
 

For later support of

- tiles

- Natural stone and concrete block slabs

- elastic and textile floor coverings

- Parquet flooring

ARDEX A46

Solid external leveling compound

Cement-based.

Filling holes, recesses, bumps, slits, outbursts in floor and wall surfaces.

Mending and leveling steps and pedestals.

Making down-grade leveling and leveling transitions on floor surfaces.

For indoor and outdoor use.

Easy processing,

smoothable with putty and felt-tool,

quickly accessible,

fast loadable,

without cracks.


Application:

Indoors and outdoors. Wall and floor.

Leveling of floor and wall surfaces in layer thicknesses from 2 to 30 mm.

- on concrete, cement screed, masonry (except aerated concrete), plaster of mortar groups P II and P III and other suitable substrates.

- Before tiling of tiles and plate coverings, paints and coatings

- as top layer in normally stressed areas

- under flat filler layers of ARDEX K301 Exterior Filler

ARDEX AM100

Levelling mortar

Based on cement.

Leveling, repairing and plastering wall surfaces in thin and thick layers indoor, outdoor and underwater.

Creation of height compensating layers and reparing of floor surfaces made of concrete and cement screed for the preparation before tiling.

2 hours after processing ready for tiling.

Low stress, water and weather resistant, easy to process, smoothing.

Layer thicknesses of 5 to 50 mm possible.


Applikation:

Indoor and outdoor. Wall and floor.

- Leveling, repairing and plastering of concrete wall surfaces

- masonry (except aerated concrete)

- plaster of mortar classification PII and PIII



containers:

25kg bag

ARDEX AR300

Multimortar

On cement basis

Indoors and outdoors. Wall and floor.

Low-tension, waterproof and weatherproof, easy to procett, smoothable with putty and felt-tool.


Application:

Building of mineral building boards, gypsum plaster boards, hard foam insulation boards with mortar lamination, etc.

Leveling, filling and plastering of wall and floor surfaces in layer thicknesses of 2 - 30 mm before tiling.

Filling holes, indentations, slots, and outbursts.

Bonding of facing blocks made of aerated concrete and sand-lime brick in static non-relevant areas, such as bathtub and washbasin wall linings, Duschabtrennungen u.ä.

Bonding of stoneware and stoneware tiles with quick initial adhesion and walkability.

ARDEX B14

Concrete repair mortar

•     Based on WSZ 32.5 R-SF
•     Approval no. Z-3.12-1206
•     For repairing, filling and smoothing surface defects at structural components made of concrete.
•     Hard and durable like concrete

Application:

Repairing of load-bearing components made of old and new concrete in thick and thin layers such as:

Filling holes, eruptions and defects, repairing and smoothing concrete wall and ceiling surfaces, exposed concrete, precast concrete and cement plaster.

Dilluted with sand for filling and leveling, for example before laying tiles with thin bed method, on concrete, cement plaster and masonry.

For repairing, filling and smoothing of visible concrete.

Outdoors and indoors, on dry or damp surface.


type:


When mixed with water, a supple, pasty, stable mortar is formed, which is easy to process and hardens by hydration and drying in every layer thickness.

The cement-gray putty surfaces are water and weather resistant.



Technical data according to ARDEX quality standard:


Mixing ratio:

about 6.25 l of water: 25 kg of powder

accordingly

ca.1 water: 3 1/4 powder


Bulk weight: about 1.2 kg / l


Weight of the mortar: approx. 1.9 kg / l


Material needed: approx. 1.4 kg of powder per m2 and mm


processing time

(+20 ° C): approx. 30 min.


Compressive strength: approx. 15 N / mm2 after 7 days

after 28 days approx. 20 N / mm2


Bending tensile strength: approx. 4 N / mm2 after 7 days

after 28 days approx. 7 N / mm2


pH value: approx. 12


Corrosion behavior: contains no corrosion on steel

promotional ingredients



Package unit:

25kg paper bag

ARDEX CL300

Commercial levelling compound

• Cement-based
• Filling, leveling and smoothing of floor surfaces indoors, before laying of floor coverings, tile coverings, cast stone and natural stone tiles
• Before laying parquet when using SMP adhesives, e.g. ARDEX AF 460 MS, ARDEX AF 480 MS
• For layer thicknesses from 2 to 20 mm
• self leveling
• pumpable
• After about 2 - 3 hours accessable
• lowstress

Application:


Indoors. Floors.

Filling, leveling and smoothing indoor floor surfaces.

Preparing for floor coverings, tile coverings, cast stone and natural stone slabs.

Use under parquet when using SMP adhesives, such. Eg ARDEX AF 460 MS, ARDEX AF 480 MS


Type:


Gray powder with special cements, good dispersible plastics, selected fillers and

special additives.

The mortar hardens by hydration and drying to a low-stress mass, so that cracks are nearly impossible.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

approx. 5.75 l of water: 25 kg of powder

corresponding to approx. 1 part water: 3½ parts powder

Bulk weight: approx. 1.2 kg / l

Weight of fresh mortar: approx. 1.9 kg / l

Material requirement: approx. 1.5 kg powder / m2 / mm

Processing time (+ 20 ° C): approx. 30 min. Accessibility / laying level for tiles (+ 20 ° C): approx.

Ready for installation (+ 20 ° C): after 1 day, in layer thickness up to 10 mm

after 3 days, in layer thicknesses over 10 mm

Compressive strength: approx. 10.0 N / mm2 after 1 day

after 7 days approx. 20.0 N / mm2

after 28 days approx. 30.0 N / mm2

Bending tensile strength: approx. 3.0 N / mm2 after 1 day

after 7 days approx. 5.0 N / mm2

after 28 days approx. 8.0 N / mm2

Floor heating suitability: yes


Package size:

25kg paper bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS07
Signalwort (CLP):Achtung
Gefahrenhinweise (CLP):
H319 - Verursacht schwere Augenreizung
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen
P280 - Augenschutz, Schutzhandschuhe tragen
P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen
P302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen
P260 - Staub nicht einatmen
Zusätzliche Sätze:Inhalt/Behälter gemäß lokalen/regionalen/nationalen/internationalen Vorschriften entsorgen

ARDEX F5

Fiber reinforced finishing compound

Filling, smoothing and repairing facades, walls and ceiling surfaces indoors.

For preparation before dispersion coatings and plasters, mineral plasters, silicone resin paints, dispersion silicate paints, glazing, wiping and filling methods, etc.

Reliability through fiber reinforcement.

Fast hardening even with thick layers free of cracks.

Dry up to 10 mm layer thickness after 1 day.

Suitable for repairing cracks with ARDEX BU-R reinforcement fabric.

Smoothable, grindable an processable with felt-tool.

No dipping and easy to apply.


Application:

Outdoors and indoors. Wall and ceiling.

Filling, smoothing and repairing facade surfaces as well as indoor walls and ceiling surfaces before application of dispersion coatings and plasters, mineral plasters, silicone resin paints, dispersion silicate paints, glazing, wiping and filling methods.

Rehabilitation of cracks in groups A.1 and A.2 in accordance with BFS-Merkblatt 19.

type:

White powder of hydraulic binders, fillers, special additives, MICROTEC fibers and flexible operating plastics.

ARDEX FIX

Super fast leveling compound

with ARDURAPID effect.

Cement-based.

Repair filler with finish character for floors.

Ready for tiling after 30 minutes.

Primer not necessary.

Fast hardening,

fast drying,

leveling to zero layer thickness.

For filling holes and eruptions,

for leveling and tiling of height offsets and bumps

For spot fillings.


Application:

Repairing surfaces before laying floor coverings.

Filling holes, eruptions and slits.

Compensation of height offsets on screeds, chipboards and other building boards.

Leveling of unevenness in cement, calcium sulphate and mastic asphalt screeds, concrete floors, chipboard, tiles and slabs.

Filling defects in old and new filler layers.

Can be used in layer thicknesses from 0 to 4 mm.

For indoors.

ARDEX K 15 DR

Glätt- und Nivelliermasse

with ARDURAPID effect.

Very low emission.

On cement basis.

With optimized processing and improved yield.

Filling compound,

Leveling compound,

Thin screed,

Self smoothing.

Produces prepared surfaces in one working area for further steps.

Herdens crackfree even in thick layers.

Also to be used on hard cast asphalt pavements.

Pumpable.


Application:

Smoothing, leveling and filling of cement, mastic asphalt and calcium sulfate screeds as well as other subsoils, for the laying of textile and elastic floor coverings, tiles and boards as well as parquet.

Composite levelling of concrete floors and raw concrete ceilings when laying floorcoverings in all areas and as a wear layer in basements and on roofs.

Self-smoothing, pumpable, crack-free even in thick layers.

For indoor use.