ARDEX 7

Reactive powder for sealing adhesive

• Sealing adhesive for laying the ARDEX SK 100 W
• Indoor and outdoor waterproofing membrabe, in swimming pools, on balconies and terraces in combination with the ARDEX SK TRICOM sealing kit
• Fast hardening and drying
• Solvent-free
• Meets the requirements of norm EN 12004

Application:

Indoors and outdoors, wall and floor.

Sealing adhesive for laying the ARDEX SK 100 W indoor and outdoor waterproofing, in swimming pools, on balconies and terraces in combination with the ARDEX SK TRICOM sealing kit.


type:

ARDEX 7 + 8 consists of the solvent-free ARDEX 8 acrylate dispersion with a liter weight of approx. 1 kg and ARDEX 7 cement-based reactive powder with a density of approx. 1.2 kg / l.

Both components are mixed for processing.


Technical data according to ARDEX quality standard:


Mixing ratio:

adhesive consistency

5,00 kg ARDEX 7 reactive powder

4.25-5.00 kg ARDEX 8

acrylate dispersion


trowelable consistency

5.0 kg ARDEX 7 reactive powder

3.5 kg ARDEX 8 acrylate dispersion


Weight of the mixed

Mortar: adhesive consistency

about 1.3 kg / l

trowelable consistency

about 1.4 kg / l


Material needed: on a smooth surface

with toothing 3 x 3 x 3 mm:

ca, 0.6 kg of powder +

about 0.4 kg dispersion =

approx. 1.0 kg of mixed material

per m²

with teeth 4 x 4 x 4 mm:

about 0.8 kg of powder +

about 0.6 kg dispersion =

approx. 1.4 kg of mixed material

per m²


processing time

(+20 ° C): approx. 60 min.

walkability

(+20 ° C): after approx. 2 hours



Packaging unit:

Bag 5kg

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05
Signalwort (CLP):
Gefahr
Gefährliche Inhaltsstoffe:
Portlandzement
Gefahrenhinweise (CLP):
H315 - Verursacht HautreizungenH318 - Verursacht schwere Augenschäden
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen
P280 - Augenschutz, Schutzhandschuhe tragen
P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen
P302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen
P261 - Einatmen von Staub vermeiden

ARDEX 8

Dichtmasse (Dispersion)

Sealing under tiles and slabs indoors and outdoors.

Spreadable,

putty applicable,

solvent-free,

toughness,

deformable

crack bridging.


Approved by the building authorities for the production of a composite sealant in highly loaded wet areas of the stress class A and B according to »Prüfgrundsätze zur Erteilung eines allgemeinen bauaufsichtlichen Prüfzeugnisses für flüssig zu verarbeitende Abdichtungsstoffe im Verbund mit Fliesen- und Plattenbelägen«.


Application:

Indoors and outdoors. Wall and floor.

Sealing of wall and floor surfaces under tile and slab linings in the case of stresses such as occur in shower rooms, bathrooms, shower areas above bathtubs and sanitary facilities in public and commercial areas with floor drains.

Also suitable for smoothing out irregularities.

Sealing of wall and floor surfaces of stress classes A according to the test principles

(eg public showers, swimming pool walks, etc.) as well as the areas under moderate loads according to class A0 and B0 (eg domestic baths, bathrooms of hotels, etc.).

For outdoor use:

Waterproofing and protection of the substrate against moisture penetration and efflorescence on terraces and balconies under tile and slab linings. Suitable substrates are cement screeds and concrete.

type:

ARDEX 8 + 9 consists of the solvent-free ARDEX 8 acrylate dispersion with a weight of approx. 1.0 kg/litre and the ARDEX 9 reactive powder on a cement basis with a bulk density of approx. 1.2 kg / l.

For processing, the two components are mixed. When hardened, ARDEX 8 + 9 sealant is waterproof and highly ductile; does not affect dyestuffs.

Compounding:

ARDEX 8 + 9 can be applied by spreading by using a putty.

The sealing compound must first be applied in the levelable consistency, also in order to form the corner joints, wall connections, etc.

The mixing ratio is:

3.5 kg of ARDEX 8 acrylate dispersion

5.0 kg of ARDEX 9 Reactive Powder

To stir the spreadable consistency, the remaining ARDEX 8 acrylate dispersion is then added.

The mixing ratio is:

3.5 + 1.5 = 5.0 kg of ARDEX 8 acrylate dispersion

5.0 kg of ARDEX 9 Reactive Powder


Bucket size:

5kg (dispersion compound)

(ARDEX 9 reactive powder is also required for mixing)

ARDEX 9

Dichtmasse (Reaktivpulver)

Sealing under tiles and slabs indoors and outdoors.

Spreadable,

putty applicable,

solvent-free,

toughness,

deformable

crack bridging.


Approved by the building authorities for the production of a composite sealant in highly stressed wet areas of class A and B according to »Prüfgrundsätze zur Erteilung eines allgemeinen bauaufsichtlichen Prüfzeugnisses für flüssig zu verarbeitende Abdichtungsstoffe im Verbund mit Fliesen- und Plattenbelägen«.


Application:

Indoor and outdoor. Wall and floor.

Sealing of wall and floor surfaces under tile and slab linings in the case of stresses such as occur in shower rooms, bathrooms, shower areas over bathtubs and sanitary facilities in public and commercial areas with floor drains.

Also suitable for smoothing out irregularities.

Sealing of wall and floor surfaces of class A according to the test principles

(eg public showers, swimming pool walks, etc.) as well as the areas not subject to structural control under moderate loads according to class A0 and B0 (eg domestic baths, bathrooms of hotels, etc.). ).

For outdoor use:

Waterproofing and protection of the substrate against moisture penetration and efflorescence on terraces and balconies under tile and slab linings. Suitable substrates are cement screeds and concrete.

type:

ARDEX 8 + 9 consists of the solvent-free ARDEX 8 acrylate dispersion with a weight of approx. 1.0 kg/litre and the ARDEX 9 reactive powder on a cement basis with a bulk density of approx. 1.2 kg / l.

For processing, the two components are mixed. When hardened, ARDEX 8 + 9 sealant is waterproof and highly ductile; does not affect dyeing on joint seal.

Compounding:

ARDEX 8 + 9 can be applied by spreading and by using a putty.

The sealing compound must first be applied in the levelable consistency, also in order to form the corner joints, wall connections, etc.

The mixing ratio is:

3.5 kg of ARDEX 8 acrylate dispersion

5.0 kg of ARDEX 9 Reactive Powder

To stir the spreadable consistency, the remaining ARDEX 8 acrylate dispersion is then added.

The mixing ratio is:

3.5 + 1.5 = 5.0 kg of ARDEX 8 acrylate dispersion

5.0 kg of ARDEX 9 Reactive Powder


Package size:

5kg bag (reactive powder)

(dispersion ARDEX 8 is also required for mixing)

(dispersion ARDEX 8 is required for mixing)

ARDEX CA20 P

SMP-Assembly adhesive

1-component assembly adhesive based on silane-modified polymers.

 

• Bonding of profiles, baseboards, cable ducts, insulation boards, wood and plastic materials, metal profiles, parquet elements, ceramic tiles and many other materials, on absorbent or dense substrates.
• Sealing of floor and connecting joints in metal, wood, ceramics and plastics.
• Can be used inside and outside.
• Solventless and anhydrous.
• High adhesion.
• Hardening without fading with elastic and vibration-resistant adhesive joint.

Application:

Insidoor and outdoor. Wall or floor.


Bonding of profiles, baseboards, cable ducts, insulation boards, wood and plastic materials, metal profiles, parquet elements, ceramic tiles and many others Materials, on absorbent or dense substrates.

Sealing of floor and connecting joints in metal, wood, ceramics and plastics


Type:

Silane-modified polymer, which hardens by reaction with moisture.


Package:

Cartridge with 310ml

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Sicherheitshinweise (CLP):P102 - Darf nicht in die Hände von Kindern gelangen

ARDEX S7 PLUS

Flexible Dichtschlämme

Sealing under tiles and slabs indoors, outdoors and in swimming pools.

Powdery,

one-component without smelling,

spreadable and fillable,

very good smoothing,

flexible,

crack compensating,

vapor permeable,

pressure water to 3 bar.



Application:

Indoors and outdoors. Wall and floor.

Sealing of wall and floor surfaces under tiles and slab linings under conditions such as those occurring on balconies and terraces, in swimming pools, shower rooms, bathrooms, shower areas, bathtubs and sanitary facilities in public and commercial areas with floor drainage.

Also suitable for smoothing out irregularities.

On following surfaces:

Concrete, masonry, gas concrete, plaster, gypsum boards, gypsum fiber boards and other building boards, cement screeds, calcium sulphate screeds, dry screeds, old tile and plate surfaces (glazed and polished surfaces). Screeds with integrated heating elements and other suitable surfaces.

type:

Powders with special cements, fillers, special additives and flexibly effective plastics.

Stirred with water, a supple, spreadable, rollable and groutable mortar is produced which hardens by

Hydration and drying.

The hardened sealing layer is permanently watertight and flexible.

ARDEX S8 Flow

selflevelling waterproof coating

Waterproofing under tiles and slabs for indoor, outdoor and swimming pool areas

Powdery, one-component and odorless

Excellent flow and smoothness characteristics

Long processability

Spreadable and applicable with putty

processable while standing

quick and economical processing through self-smoothing

Flexible

Crackbridging

Vapor-permeable

Pressure water tight up to 5 bar

Also suitable for gradient surfaces

Suitable for layer thicknesses up to 5 mm



Approved by the building authorities for the production of a composite seal in heavily loaded areas

Wet areas of stress classes A and B according to »Prüfgrundsätze
 

zur Erteilung eines allgemeinen bauaufsichtlichen Prüfzeugnisses für flüssig zu

verarbeitende Abdichtungen im Verbund mit Fliesen- und Plattenbelägen

«.



Application:

At floors Indoors and outdoors.

Sealing of floor surfaces under tiles and slabs under stresses occurring on balconies and terraces, in swimming pools, shower rooms, bathrooms, shower areas, sanitary facilities in public and commercial areas with floor drains.

Sealing of floor surfaces of stress classes A and B in accordance with the test principles for the issuing of a general building inspectorate test certificate (eg public showers, swimming pools, walkways, etc.) as well as for load classes A0 and B0 in not

To compensate for unevenness up to a total thickness of 5 mm.

On substrates from:

Concrete, cement screeds, calcium sulphate flowcoats, dry screeds, old tiles and slabs (sanding glazed and polished surfaces), screeds with integrated heating elements and other suitable substrates.

type:

Powder with special cements, fillers, special additives and elastic working plastics.

When mixed with water, a smooth, spreadable, rollable and trowelable mortar is created

and hardens by hydration and drying.

The hardened sealing layer is permanently waterproof and flexible.


Package unit:

15kg plastic bag

ARDEX

ARDEX SK-270

TRICOM angle 270°

ARDEX SK270

TRICOM outer angle 270 °

Side length: 115 mm


Application:


Indoors and outdoors. Wall and floor.

Sealing set for flexible and watertight bridging of movement joints, edge joints and lead-througs which are in the risk of getting cracks.

In the combination with:

ARDEX S1-K sealant

ARDEX S7 Flexible Sealing Slurry.

ARDEX 8 + 9 sealant

ARDEX SK100W TRICOM sealing membrane.

for use in composite waterproofing

- according to ZDB leaflet »Verbundabdichtungen«

for load classes A, B, C, A0 and B0

- in accordance with Building Regulations List A, Part 2, No. 1. 10

»Flüssig zu verarbeitende Abdichtungsstoffe im
 

Verbund mit...«, stress classes A, B and C

- according to ETAG 022 Waterproofing for walls and floors

in wet rooms,

Part 2: Waterproofing membranes


type:


The ARDEX SK TRICOM sealing kit consists of a polypropylene nonwoven backing laminated on both sides with a polyurethane backing layer or a polypropylene nonwoven backing laminated on both sides with a polyvinyl chloride backing and a butyl ring.

The material is waterproof, easy to cut with a knife or scissors, very well embedded in the waterproofing compounds, does not fold and has a high bondability to the sealants.

The low material thickness allows almost seamless coating with the ARDEX sealants.

The ARDEX SK TRICOM sealing set is sufficiently permeable to allow the sealant underneath to dry and harden.


Technical data according to ARDEX quality standard:


Color: white

Suitable: for joint widths up to max. 30 mm

elongation at rupture

Carrier layer: 600% at 60 N / 15 mm

thickness > ca. 0.32 mm

Total weight: approx. 180 g / m2

Bursting pressure: 3.0 bar

Allowed

Movement absorption:

Max. 80% of the joint width

Temperature resistance:

-35 ° C to + 90 ° C

 

 

containers:

1 piece

ARDEX SK-90

TRICOM angle 90°

ARDEX SK90

TRICOM inner corner 90 °

Thigh length: 120 mm



Application:


Indoors and outdoors. Wall and floor.

Sealing set for flexible and watertight bridging of movement joints, edge joints and lead-througs which are in the risk of getting cracks.

In the system with:

ARDEX S1-K sealant

ARDEX S7 Flexible Sealing Slurry.

ARDEX 8 + 9 sealant

ARDEX SK100W TRICOM sealing membrane.

for use in composite waterproofing

- according to ZDB leaflet »Verbundabdichtungen«

for load classes A, B, C, A0 and B0

- in accordance with Building Regulations List A, Part 2, No. 1. 10

»Flüssig zu verarbeitende Abdichtungsstoffe im
 

Verbund mit...«, stress classes A, B and C

- according to ETAG 022 Waterproofing for walls and floors

in sanitary facilities,

Part 2: Waterproofing membranes


type:


The ARDEX SK TRICOM sealing kit consists of a polypropylene nonwoven backing laminated on both sides with a polyurethane backing layer or a polypropylene nonwoven backing laminated on both sides with a polyvinyl chloride backing and a butyl ring.

The material is waterproof, easy to cut with a knife or scissors, very well embedded in the waterproofing compounds, does not fold and has a high bondability to the sealants.

The low material thickness allows almost seamless coating with the ARDEX sealants.

The ARDEX SK TRICOM sealing set is sufficiently permeable to allow the sealant underneath to dry and harden.


Technical data according to ARDEX quality standard:


Color: white

Suitable: for joint widths up to max. 30 mm

elongation at rupture

Carrier layer: 600% at 60 N / 15 mm

thickness > ca. 0.32 mm

Total weight: approx. 180 g / m2

Bursting pressure: 3.0 bar

Allowed

Movement absorption:

Max. 80% of the joint width

Temperature resistance:

-35 ° C to + 90 ° C

 

containers:

1 piece

ARDEX SK-W

TRICOM sealing collar 120 x120

The ARDEX SK-W

TRICOM Sealing collar 120x120 is prepared for a 1/2 inch pipe lead-through an existing opening. To make larger openings, use scissors or a knife to make the required cut-out, but cut out approx. 8 -12 mm smaller as needed. Place the recess of the sealing collar centered on the pipe lead-through. With even pressure, slip the sleeve over the pipe extension or the permanently installed pipe and bring it to the ground. The sealing collar fits correctly if it tightly fits to the pipe at least 4 mm.



Application:


Indoors and outdoors. Wall and floor.

Sealing set for flexible and watertight bridging of movement joints, edge joints and lead-througs which are in the risk of getting cracks.

In the system with:

ARDEX S1-K sealant

ARDEX S7 Flexible Sealing Slurry.

ARDEX 8 + 9 sealant

ARDEX SK100W TRICOM sealing membrane.

for use in composite waterproofing

- according to ZDB leaflet »Verbundabdichtungen«

for load classes A, B, C, A0 and B0

- in accordance with Building Regulations List A, Part 2, No. 1. 10

»Flüssig zu verarbeitende Abdichtungsstoffe im
 

Verbund mit... «, stress classes A, B and C

- according to ETAG 022 Waterproofing for walls and floors

in sanitary facilities,

Part 2: Waterproofing membranes


type:


The ARDEX SK TRICOM sealing kit consists of a polypropylene nonwoven backing laminated on both sides with a polyurethane backing layer or a polypropylene nonwoven backing laminated on both sides with a polyvinyl chloride backing and a butyl ring.

The material is waterproof, easy to cut with a knife or scissors, very well embedded in the waterproofing compounds, does not fold and has a high bondability to the sealants.

The low material thickness allows almost seamless coating with the ARDEX sealants.

The ARDEX SK TRICOM sealing set is sufficiently permeable to allow the sealant underneath to dry and harden.


Technical data according to ARDEX quality standard:


Color shade: white

Suitable: for joint widths up to max. 30 mm

elongation at rupture

Base layer: 600% at 60 N / 15 mm

Thickness > ca. 0.32 mm

Total weight: approx. 180 g / m2

Bursting pressure: 3.0 bar

Allowed

Movement absorption:

Max. 80% of the joint width

Temperature resistance:

-35 ° C to + 90 ° C

 

Packaging unit:

1 piece

ARDEX

ARDEX SK 100 W

TRICOM Sealing

Product description

ARDEX SK 100 W consists of a laminated on both sides

Polypropylene fleece with a polyethylene film.



Sealing wall and floor surfaces indoors and outdoors,

in swimming pools,

on balconies and terraces before laying tiles and tile coverings.

Waterproof,

crack bridging,

Ensures even layer thicknesses,

alkali-resistant,

easy to cut and to process,

Further working steps possible quickly.


Application:


Indoor and outdoor. Wall and floor.

Sealing of wall and floor surfaces under tiles and tile coverings under conditions such as in shower rooms, bathrooms, shower areas over bathtubs, sanitary facilities, swimming pools, on balconies and terraces, as well as chemically stressed areas e.g. commercial kitchens can occur.

Tested according to the guideline of the European technical approval (ETAG 022) for waterproofing walls and floors in wet rooms, Part 2: Waterproofing membranes.


Approved by the building authorities for the production of a composite seal in heavily loaded wet areas of load classes A, B and C according to "Prüfgrundsätze zur Erteilung eines allgemeinen bauaufsichtlichen Prüfzeugnisses für Abdichtungsstoffe im Verbund mit Fliesen- und Plattenbelägen", Part 2: Laminated composite waterproofing.


Corresponds to the requirements of the leaflet "Hinweise für die Ausführung von Abdichtungen im Verbund mit Bekleidungen und Belägen aus Fliesen und Platten für den Innen- und Außenbereich", ZDB.

(Moisture exposure classes A, B, C, A0 and B0) According to the guideline ETAG 022, part 2, the tested product composite consisting of the ARDEX SK 100 W sealing membrane and the system products listed below:


- ARDEX X 77 MICROTEC flexible adhesive

- ARDEX 7 + 8 sealing adhesive

- ARDEX CA 20 P SMP mounting adhesive

- ARDEX SK 12 TRICOM sealing tape 120

- ARDEX SK-W TRICOM sealing collar 120 x 120

- ARDEX SK-F TRICOM gasket 425 x 425

- ARDEX SK 90 TRICOM corner 90 °

- ARDEX SK 270 corner 270 °

- ARDEX SK-G TRICOM Pipe Collar

(deep drawn) 350 x 350

- ARDEX SK-R TRICOM stretch zone cuff 200 x 200

- ARDEX SK-S TRICOM stretch zone cuff 150 x 150

- ARDEX SK-B sealing ring 100 x 200