ARDEX QS

Quartz sand

Product description

For sanding of:
 

•      ARDEX EP 2000
•      ARDEX FB

Other applications:

  Filler, sandblasting, filter sand, additive in building materials, scattering and adhesive (brake sand).


Technical information

Grain size:

0.2-0.6 mm


Package size:

25kg paper bag

ARDEX R1

Renovation filler

with ARDURAPID EFFECT.

Contains cement.

For smoothing and filling of wall and ceiling surfaces in the renovation and new construction phase.

Combines the advantages of a dispersion filling compound with the rapid drying of a quick smoothing cement.

For leveling work in accordance with quality levels Q1-Q4 *.

Low stress and crack-free.

For layer thicknesses up to 10 mm.

Low shrinking behavior.

Easy to process.

Excellent adhesion.

Smooth also without felt treatment.

Very efficient.


Application:

Smoothing and filling of wall and ceiling surfaces as preparation for wallpaper, paints, dispersion plasters and wall coverings.

Filling cracks, deep holes, slits and joints in gypsum boards and other building boards.

Closing of joints in prefabricated concrete ceilings.

For indoor use.

Type:

White powder made of special cement and elastifying plastic powders.

The powder is mixed with water to a supple mass, which is easy to processed for approx. 30 minutes.

Dried layers are low-stress and diffusion-free.

ARDEX R1 is non-corrosive.

ARDEX R4 RAPID

Universal quick filler

with ARDURAPID® effect.

White cement base.

Firm repair filler with finish character.

Adheres to almost all building substrates without primer.

For the wall, ceiling and floors.

For filling holes and outbursts.

For leveling and tiling off heights, transitions and bumps.

For spot fillings.

For quick locking of metal, joint and angle profiles.

Reworkable after 45- 60 minutes.

Fast drying.

Leveling to zero layer thickness.

Pure white.


Scope of application:

Smoothing and filling of wall, ceiling and floor surfaces to receive wallpaper, paint, dispersion plaster, wall and floor coverings on absorbent and non-absorbent surfaces. Fill cracks, deep holes, slits and joints.

In the floor area for the revision of unevenness and trowel strokes on gypsum and cement putties.

For quick locking of metal, joint and angle profiles.

As a quick-assembly system for quick repairs.

For the interior.

Can be used with flat putties in layer thicknesses from 0 to 10 mm.

type:

Special cements, good dispersible plastic powder and fine-grained fillers.

When mixed with water, a stable mortar is produced, which is processed for about 15 minutes

can and already solidifies within 30-45 minutes by hydration and drying. Revision with all coverings (parquet with ARDEX SMP adhesives) is possible after approx. 45 min. On absorbent surfaces and approx. 60 min. On non-absorbent surfaces.

ARDEX S28 NEU

MICROTEC Großformatkleber

with ARDURAPID® effect.

For indoor use.

Staining-, deformation- and efflorescence-free laying of natural stones, concrete blocks and cottoplates.

Laying of tiles from stone and fine stoneware.

Perfect for laying large format tiles and slabs on calcium sulphate screeds.

For applying large size and thin tiles to moisture sensitive

Such as e.g. Plasterboards, gypsum plasterboard and wooden subsoils.

Laying of resin-bonded tiles (quartz composites)

Reliable through fiber reinforcement

- Shear stresses are compensated

- Adhesion strengths are improved

- Deformation forces are reduced

For adhesive bed thicknesses of 2 - 15 mm.

After about 4 hours walkable and jointable.

In combination with ARDEX E 90 Kunstharzvergütung, a special adhesive with high formability (S2 according to norm EN 12002) and water-repellent properties is created.


Application:

Indoors. Floor and wall.

Production of a flexible adhesive bed with soft, soft mortar consistency, which allows a fully embedding in the floating method. Staining-, deformation-, and efflorescence-free laying of natural stones, concrete blocks and cottoplates in the thin and medium thick bed method.

Laying of stoneware and fine stone tiles.

Ideally suited for laying large format tiles and slabs on calcium sulphate screeds.

For applying large size and thin tiles on moisture sensitive substrates, e.g. Plasterboards, gypsum plasterboard and wooden subsoils.

Laying of resin-bonded tiles (quartz composites).

Laying of tiles and slabs on still shrinking concrete substrates (at least 3 months old). Plating on screeds with integrated heating elementsi.

type:

Powders with special cements, fillers, special additives and flexibly operating plastics.

Stirred with water, a supple pasty adhesive mortar results which hardens by hydration with complete crystalline water binding.

ARDEX S7 PLUS

Flexible Dichtschlämme

Sealing under tiles and slabs indoors, outdoors and in swimming pools.

Powdery,

one-component without smelling,

spreadable and fillable,

very good smoothing,

flexible,

crack compensating,

vapor permeable,

pressure water to 3 bar.



Application:

Indoors and outdoors. Wall and floor.

Sealing of wall and floor surfaces under tiles and slab linings under conditions such as those occurring on balconies and terraces, in swimming pools, shower rooms, bathrooms, shower areas, bathtubs and sanitary facilities in public and commercial areas with floor drainage.

Also suitable for smoothing out irregularities.

On following surfaces:

Concrete, masonry, gas concrete, plaster, gypsum boards, gypsum fiber boards and other building boards, cement screeds, calcium sulphate screeds, dry screeds, old tile and plate surfaces (glazed and polished surfaces). Screeds with integrated heating elements and other suitable surfaces.

type:

Powders with special cements, fillers, special additives and flexibly effective plastics.

Stirred with water, a supple, spreadable, rollable and groutable mortar is produced which hardens by

Hydration and drying.

The hardened sealing layer is permanently watertight and flexible.

ARDEX S8 Flow

selflevelling waterproof coating

Waterproofing under tiles and slabs for indoor, outdoor and swimming pool areas

Powdery, one-component and odorless

Excellent flow and smoothness characteristics

Long processability

Spreadable and applicable with putty

processable while standing

quick and economical processing through self-smoothing

Flexible

Crackbridging

Vapor-permeable

Pressure water tight up to 5 bar

Also suitable for gradient surfaces

Suitable for layer thicknesses up to 5 mm



Approved by the building authorities for the production of a composite seal in heavily loaded areas

Wet areas of stress classes A and B according to »Prüfgrundsätze
 

zur Erteilung eines allgemeinen bauaufsichtlichen Prüfzeugnisses für flüssig zu

verarbeitende Abdichtungen im Verbund mit Fliesen- und Plattenbelägen

«.



Application:

At floors Indoors and outdoors.

Sealing of floor surfaces under tiles and slabs under stresses occurring on balconies and terraces, in swimming pools, shower rooms, bathrooms, shower areas, sanitary facilities in public and commercial areas with floor drains.

Sealing of floor surfaces of stress classes A and B in accordance with the test principles for the issuing of a general building inspectorate test certificate (eg public showers, swimming pools, walkways, etc.) as well as for load classes A0 and B0 in not

To compensate for unevenness up to a total thickness of 5 mm.

On substrates from:

Concrete, cement screeds, calcium sulphate flowcoats, dry screeds, old tiles and slabs (sanding glazed and polished surfaces), screeds with integrated heating elements and other suitable substrates.

type:

Powder with special cements, fillers, special additives and elastic working plastics.

When mixed with water, a smooth, spreadable, rollable and trowelable mortar is created

and hardens by hydration and drying.

The hardened sealing layer is permanently waterproof and flexible.


Package unit:

15kg plastic bag

ARDEX

ARDEX SK-270

TRICOM angle 270°

ARDEX SK270

TRICOM outer angle 270 °

Side length: 115 mm


Application:


Indoors and outdoors. Wall and floor.

Sealing set for flexible and watertight bridging of movement joints, edge joints and lead-througs which are in the risk of getting cracks.

In the combination with:

ARDEX S1-K sealant

ARDEX S7 Flexible Sealing Slurry.

ARDEX 8 + 9 sealant

ARDEX SK100W TRICOM sealing membrane.

for use in composite waterproofing

- according to ZDB leaflet »Verbundabdichtungen«

for load classes A, B, C, A0 and B0

- in accordance with Building Regulations List A, Part 2, No. 1. 10

»Flüssig zu verarbeitende Abdichtungsstoffe im
 

Verbund mit...«, stress classes A, B and C

- according to ETAG 022 Waterproofing for walls and floors

in wet rooms,

Part 2: Waterproofing membranes


type:


The ARDEX SK TRICOM sealing kit consists of a polypropylene nonwoven backing laminated on both sides with a polyurethane backing layer or a polypropylene nonwoven backing laminated on both sides with a polyvinyl chloride backing and a butyl ring.

The material is waterproof, easy to cut with a knife or scissors, very well embedded in the waterproofing compounds, does not fold and has a high bondability to the sealants.

The low material thickness allows almost seamless coating with the ARDEX sealants.

The ARDEX SK TRICOM sealing set is sufficiently permeable to allow the sealant underneath to dry and harden.


Technical data according to ARDEX quality standard:


Color: white

Suitable: for joint widths up to max. 30 mm

elongation at rupture

Carrier layer: 600% at 60 N / 15 mm

thickness > ca. 0.32 mm

Total weight: approx. 180 g / m2

Bursting pressure: 3.0 bar

Allowed

Movement absorption:

Max. 80% of the joint width

Temperature resistance:

-35 ° C to + 90 ° C

 

 

containers:

1 piece

ARDEX SK-90

TRICOM angle 90°

ARDEX SK90

TRICOM inner corner 90 °

Thigh length: 120 mm



Application:


Indoors and outdoors. Wall and floor.

Sealing set for flexible and watertight bridging of movement joints, edge joints and lead-througs which are in the risk of getting cracks.

In the system with:

ARDEX S1-K sealant

ARDEX S7 Flexible Sealing Slurry.

ARDEX 8 + 9 sealant

ARDEX SK100W TRICOM sealing membrane.

for use in composite waterproofing

- according to ZDB leaflet »Verbundabdichtungen«

for load classes A, B, C, A0 and B0

- in accordance with Building Regulations List A, Part 2, No. 1. 10

»Flüssig zu verarbeitende Abdichtungsstoffe im
 

Verbund mit...«, stress classes A, B and C

- according to ETAG 022 Waterproofing for walls and floors

in sanitary facilities,

Part 2: Waterproofing membranes


type:


The ARDEX SK TRICOM sealing kit consists of a polypropylene nonwoven backing laminated on both sides with a polyurethane backing layer or a polypropylene nonwoven backing laminated on both sides with a polyvinyl chloride backing and a butyl ring.

The material is waterproof, easy to cut with a knife or scissors, very well embedded in the waterproofing compounds, does not fold and has a high bondability to the sealants.

The low material thickness allows almost seamless coating with the ARDEX sealants.

The ARDEX SK TRICOM sealing set is sufficiently permeable to allow the sealant underneath to dry and harden.


Technical data according to ARDEX quality standard:


Color: white

Suitable: for joint widths up to max. 30 mm

elongation at rupture

Carrier layer: 600% at 60 N / 15 mm

thickness > ca. 0.32 mm

Total weight: approx. 180 g / m2

Bursting pressure: 3.0 bar

Allowed

Movement absorption:

Max. 80% of the joint width

Temperature resistance:

-35 ° C to + 90 ° C

 

containers:

1 piece

ARDEX SK-W

TRICOM sealing collar 120 x120

The ARDEX SK-W

TRICOM Sealing collar 120x120 is prepared for a 1/2 inch pipe lead-through an existing opening. To make larger openings, use scissors or a knife to make the required cut-out, but cut out approx. 8 -12 mm smaller as needed. Place the recess of the sealing collar centered on the pipe lead-through. With even pressure, slip the sleeve over the pipe extension or the permanently installed pipe and bring it to the ground. The sealing collar fits correctly if it tightly fits to the pipe at least 4 mm.



Application:


Indoors and outdoors. Wall and floor.

Sealing set for flexible and watertight bridging of movement joints, edge joints and lead-througs which are in the risk of getting cracks.

In the system with:

ARDEX S1-K sealant

ARDEX S7 Flexible Sealing Slurry.

ARDEX 8 + 9 sealant

ARDEX SK100W TRICOM sealing membrane.

for use in composite waterproofing

- according to ZDB leaflet »Verbundabdichtungen«

for load classes A, B, C, A0 and B0

- in accordance with Building Regulations List A, Part 2, No. 1. 10

»Flüssig zu verarbeitende Abdichtungsstoffe im
 

Verbund mit... «, stress classes A, B and C

- according to ETAG 022 Waterproofing for walls and floors

in sanitary facilities,

Part 2: Waterproofing membranes


type:


The ARDEX SK TRICOM sealing kit consists of a polypropylene nonwoven backing laminated on both sides with a polyurethane backing layer or a polypropylene nonwoven backing laminated on both sides with a polyvinyl chloride backing and a butyl ring.

The material is waterproof, easy to cut with a knife or scissors, very well embedded in the waterproofing compounds, does not fold and has a high bondability to the sealants.

The low material thickness allows almost seamless coating with the ARDEX sealants.

The ARDEX SK TRICOM sealing set is sufficiently permeable to allow the sealant underneath to dry and harden.


Technical data according to ARDEX quality standard:


Color shade: white

Suitable: for joint widths up to max. 30 mm

elongation at rupture

Base layer: 600% at 60 N / 15 mm

Thickness > ca. 0.32 mm

Total weight: approx. 180 g / m2

Bursting pressure: 3.0 bar

Allowed

Movement absorption:

Max. 80% of the joint width

Temperature resistance:

-35 ° C to + 90 ° C

 

Packaging unit:

1 piece

ARDEX

ARDEX SK 100 W

TRICOM Sealing

Product description

ARDEX SK 100 W consists of a laminated on both sides

Polypropylene fleece with a polyethylene film.



Sealing wall and floor surfaces indoors and outdoors,

in swimming pools,

on balconies and terraces before laying tiles and tile coverings.

Waterproof,

crack bridging,

Ensures even layer thicknesses,

alkali-resistant,

easy to cut and to process,

Further working steps possible quickly.


Application:


Indoor and outdoor. Wall and floor.

Sealing of wall and floor surfaces under tiles and tile coverings under conditions such as in shower rooms, bathrooms, shower areas over bathtubs, sanitary facilities, swimming pools, on balconies and terraces, as well as chemically stressed areas e.g. commercial kitchens can occur.

Tested according to the guideline of the European technical approval (ETAG 022) for waterproofing walls and floors in wet rooms, Part 2: Waterproofing membranes.


Approved by the building authorities for the production of a composite seal in heavily loaded wet areas of load classes A, B and C according to "Prüfgrundsätze zur Erteilung eines allgemeinen bauaufsichtlichen Prüfzeugnisses für Abdichtungsstoffe im Verbund mit Fliesen- und Plattenbelägen", Part 2: Laminated composite waterproofing.


Corresponds to the requirements of the leaflet "Hinweise für die Ausführung von Abdichtungen im Verbund mit Bekleidungen und Belägen aus Fliesen und Platten für den Innen- und Außenbereich", ZDB.

(Moisture exposure classes A, B, C, A0 and B0) According to the guideline ETAG 022, part 2, the tested product composite consisting of the ARDEX SK 100 W sealing membrane and the system products listed below:


- ARDEX X 77 MICROTEC flexible adhesive

- ARDEX 7 + 8 sealing adhesive

- ARDEX CA 20 P SMP mounting adhesive

- ARDEX SK 12 TRICOM sealing tape 120

- ARDEX SK-W TRICOM sealing collar 120 x 120

- ARDEX SK-F TRICOM gasket 425 x 425

- ARDEX SK 90 TRICOM corner 90 °

- ARDEX SK 270 corner 270 °

- ARDEX SK-G TRICOM Pipe Collar

(deep drawn) 350 x 350

- ARDEX SK-R TRICOM stretch zone cuff 200 x 200

- ARDEX SK-S TRICOM stretch zone cuff 150 x 150

- ARDEX SK-B sealing ring 100 x 200