ARDEX K301

Aussenspachtelmasse

On cement basis.

Levelling, filling and smoothing of floor surfaces both indoors and outdoors.

Manufacture of utility layers in commercial and industrial areas, garages,

on park decks, farmyards and paths.

Levelling of floor surfaces in wet areas, permanent wet areas, on balconies and terraces, as preparation before tiling, painting or coating.

For layer thicknesses from 2 to 20 mm.

Self smoothing,

pumpable

quickly accessible,

quickly loadable,

hardening crackless.


Application:

Floor indoors and outdoors.

Filling, levelling and smoothing of floor surfaces made of concrete, cement screed, tiles and slabs, as well as other suitable subsoils.

Production of utility layers in storage rooms, workshops, production halls, garages, on park decks, courtyard areas and paths.

Levelling of floor surfaces in wet areas, permanent wet areas, on balconies and terraces, for the preparation of laying tiles and tile coverings, paintings or coatings.

ARDEX K33

Universalspachtelmasse

with ARDURAPID effect.

Very low emission.

On cement basis.

Production of evenly absorbent and even surfaces before laying of elastic and textile floor coverings, parquet and tile coverings.

For layer thicknesses of 1.5 - 15 mm, stretched to 30 mm.

Walkable after 2 - 3 hours.

Ready for further steps after 1 day at 10 mm layer thickness.

Self leveling,

grindable,

excellent filling characteristics,

pumpable

hardens crackfree.

Finished floor surfaces in one working step.


ARDEX Systemprodukt

Particularly steady bonding properties with ARDEX flooring adhesives.


Application:

Smoothing and leveling of cement, mastic asphalt and calcium sulfate screeds, concrete floors and other suitable substrates before laying of textile and elastic floor coverings, tiles and boards as well as parquet.

For indoor use.

ARDEX K39

MICROTEC Floor filling compound

Cement-based.

Filling and leveling of soil surfaces for the laying of elastic and textile floor coverings, tile and slab coverings as well as parquet.

Production of smooth and flat installation surfaces especially for PVC and PVC design coverings and large-format tile and slab coverings.

For layer thicknesses up to 10 mm, dilluted with sand up to 20 mm.

Excellent leveling and self-smoothing properties with long processing time.
 

Excellent filling characteristics,

grindable,

pumpable

without cracks.


ARDEX system product

Particularly firm bond properties with ARDEX floorcovering adhesives.


Application:

For indoor.

Filling and leveling of cement, mastic asphalt and calcium sulphate screeds, concrete floors and other suitable substrates for the laying of elastic and textile floor coverings, tile coverings and parquet.

Production of smooth and even installation surfaces, especially for PVC and PVC design coverings and large-format tile and slab coverings.

ARDEX K 80

Dünnestrich

• with ARDURAPID effect
• Cement-based
• Very low emission
• Manufacture of wear layers in commercial and industrial areas
• Leveling and smoothing of floor surfaces
• For layer thicknesses from 5 mm to 50 mm
• self leveling properties
• hardening without cracks even in thick layers
• Pumpable
• Quick accessable
• Quick loadable

Application:

Leveling and smoothing of concrete floors, cement screeds, calcium sulphate screeds, tile and slab coverings and other load-bearing substrates.

Manufacture of plane and smooth surfaces for laying tiles, natural stone and other floor coverings.

As a wear layer in cellars, basements, hobby and games rooms, corridors, attics, storage rooms and storage areas.

Manufacture of wear layers in commercial and industrial areas.

For the indoor application.


Type:

Gray powder with special cements, good dispersible plastics and selected fillers. When mixed with water, a smooth, self-leveling, smoothing and pumpable mortar is produced, which can be processed for approx. 30 minutes and can be walked on after approx. 2 hours.

The mortar hardens by hydration and drying to a low-stress mass so that cracking is nearly eliminated.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

approx. 4.75-5 l water: 25 kg powder

corresponding to 1 part of water: 4 parts powder

Bulk weight: approx. 1.3 kg / l

Fresh weight of the mortar: approx. 2.0 kg / l

Material requirement: approx. 1.65 kg of powder per m2 and mm

Processing time (+ 20 ° C): approx. 30 min.

Accessibility (+ 20 ° C): after approx. 2 hours

Ready for laying (vapor-permeable coverings, + 20 ° C): after 1 day

(diffusion-proof coverings, + 20 ° C): up to 10 mm after 1 day

up to 30 mm after 3 days

up to 50 mm after 7 days

Compressive strength: approx. 14 N / mm2 after 1 day

after 7 days approx. 20 N / mm2

after 28 days approx. 30 N / mm2

Bending tensile strength: approx. 3.8 N / mm2 after 1 day

after 7 days approx. 5.8 N / mm2

after 28 days approx. 10.0 N / mm2

Ball pressure hardness: after 1 day approx. 60 N / mm2

after 7 days approx. 65 N / mm2

after 28 days approx. 90 N / mm2

Chair role suitability: yes

Floor heating suitability: yes


Package size:

25kg bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS07
Signalwort (CLP):Achtung
Gefährliche Inhaltsstoffe:Portlandzement
Gefahrenhinweise (CLP):
H319 - Verursacht schwere Augenreizung
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen
P280 - Augenschutz, Schutzhandschuhe tragen
P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen
P302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen
P260 - Staub nicht einatmen
Zusätzliche Sätze:Inhalt/Behälter gemäß lokalen/regionalen/nationalen/internationalen Vorschriften entsorgen

ARDEX M4

Fast setting mortar

• Made with WITTENER SCHNELLZEMENT (quick hardening cement) 32.5 R-SF Approval no. Z-3.12-1206
• Begins to harden after approx. 30 min.
• Dry mortar with quick hardening characteristics
• For anchoring, dowelling, fixing, laying, setting, repairing, concreting, laying bricks, plastering, etc.

ARDEXM4 quick mortar with addition ARDEXE100 Wittener Baudispersion matches the requirements for use in repair work on concrete surfaces.

Investigation Report No. 5014/0140 dated 11.06.1990 of the Amtliche Materialprüfungsanstalt für das Bauwesen (official german materials testing institute for construction) "iBMB", Braunschweig.



Application:

For anchoring, dowelling and fastening facade coverings, roof elements, scaffold supports, stair stringers, stair steps, lowered ceilings, ceiling coverings, handrails, window sills, sanitary equipment, heating systems, shelves, etc.

For setting and laying tiles and slabs, natural stone, terrazzo, concrete slabs, pavement slabs.

For fixing pipes, rails, bars, posts, supports, gate mounts, fence posts, signposts, etc.

For repairing and refitting concrete and reinforced concrete components as well as cement screeds and cement plasters.

For the construction of foundations for enclosures, perimeter walls, garden stairs, garbage boxes, planters, gazebos, small animal stables and for the production of garage floors and patio tiles.

For masonry work of various kinds, for example:

Creating garden walls, base walls, partitions, natural stone walls.

For the manufacture and repair of plaster surfaces, such as in damp and wet rooms, so laundry rooms, bathrooms u. Ä.

For outdoor and indoor applications.


Type:

Gray powder, made with WITTENER SCHNELLZEMENT (quick hardening cement) 32.5 R-SF, approval no. Z-3.12-1206, and quartz additives.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

approx. 3.25 l of water: 25 kg of powder

corresponding to about 1 part of water: 4 ½ parts powder

Bulk density: approx. 1.7 kg / l

Fresh weight of the mortar: approx. 2.2 kg / l

Material requirement: approx. 20.0 kg of powder per m2 and cm

Processing time (+20 ° C): approx. 30 min.

Compressive strength: after 2 hours approx. 4 N / mm2

after 1 day about 10 N / mm2

after 7 days approx. 20 N / mm2

after 28 days about 35 N / mm / 2

Bending tensile strength: after 2 hours

about 2 N / mm2

after 1 day approx. 3 N / mm2

after 7 days about 5 N / mm2

after 28 days approx. 7 N / mm2

Corrosion influences:

contains no corrosion-promoting components on steel


Package size:

25kg bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05GHS07
Signalwort (CLP):Gefahr
Gefährliche Inhaltsstoffe:Portlandzement
Gefahrenhinweise (CLP):
H315 - Verursacht Hautreizungen.
H318 - Verursacht schwere Augenschäden
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen.
P261 - Einatmen von Staub vermeiden.
P280 - Augenschutz, Schutzhandschuhe tragen.
P302+P352 - BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser und Seife waschen.
P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
Zusätzliche Sätze:Inhalt/Behälter gemäß lokalen/regionalen/nationalen/internationalen Vorschriften entsorgen

ARDEX P4

Fast multi purpose primer

Primer and bonding layer for wall, ceiling and floor surfaces indoors and outdoors.

For absorbent and dense surfaces.

As preparation for tile adhesives, floor and wall fillers.

Reliable bonding agent with a wide range of applications.

Fast drying, solvent-free, one-component, reduced drip and spray consistency, easy to apply.



Application:

Indoors and outdoors. Floor, wall and ceiling.

Primer and bonding agent for absorbent and dense

Substrates, such as:

- Concrete,

- cement and lime cement plasters,

- cement screeds and calcium sulphate screeds,

- tile and tile coverings,

- Terrazzo,

- dispersion coatings,

- old, waterproof adhesive residues,

- dry screeds,

- PVC coverings,

- fillers.

Before application of tile adhesives, floor and floor

Wall fillers.

ARDEX P51

Primer and bonding agent

For floor, wall and ceiling.

Reliable primer with a wide range of applications.

Primer, bonding and pore closure with water-repellent effect.

Prevents the rise of air bubbles from the substrate during filling.

Solvent-free.


Application:

Primer, precoat, bonding and pore seal with water-repellent effect.

For binding powdery substrate surfaces z. B. on ground, absorbent calcium sulfate and calcium sulphate screed.

For priming cement screeds, for preparing for Filling, leveling and smoothing compounds.

As a bonding agent on smooth concrete floors, especially compacted cement screeds, quenched calcium sulphate screeds, terrazzo, sandstone, tiles and tile coverings when using fillers and thin-bed mortars.

As a bonding agent on old substrates with adhesive filler and adhesive residues.

As a pore seal on concrete floors and cement screeds:


- Prevents the rising of air bubbles from the substrate during subsequent filling work,

- It prevents the escaping of mixing water during following fillings.


For priming on gypsum, calcium sulphate and chipboards for thin-bed mortar.

As a bonding agent on smooth concrete for gypsum-bound wall fillers.

Protective coating for binding dust to leveling and leveling compounds, which are used for a short time as usable surface.

For indoor usage.

ARDEX P82

Kunstharz Voranstrich

Bonding course on smooth and dense grounds.

Solvent-free, reactive two-component resin dispersion.

Replaces neoprene pre-coat


Application:

Pre-coat and adhesive course on smooth and dense ground, such as prefabricated concrete floors or specially compressed cement screeds:
 

•      inadequately sanded asphalt pavements, old melted asphalt
•      treated calcium sulfate screeds
•      Magnesite screeds
•      chipboards
•      Wood
•      terrazzo
•      sandstone
•      tiling
•      clinker
•      sheet steel
•      Plastic coatings
•      Laqcuer, oil and plasticpaints

under spatula, fillers and thin-bed mortars.

For indoor use.


Components:

ARDEX P 82, component A, light red color

and

ARDEX P 82, component B, white color

ARDEX WSZ

"Wittener Schnellzement"

Schnellzement 32,5 R-SF

Product description


Cement of strength class 32.5 R with early strength characteristics

Approved by DIBt, Berlin, Approval no. Z-3.12-1206

For the production of mortars and concrete with early initial strength
 

Application


Manufacture of mortars of early initial strength for the purpose of dowels and anchors for load-bearing structures approved by the building authorities.


For example:
 

•     claddings
•     railing
•     roof elements
•     handrails
•     scaffolding brackets
•     window sills
•     stair stringers
•     sanitary facilities
•     steps
•     heating systems
•     suspended ceilings
•     shelves
•     Ceiling coverings, etc.

Manufacture of concrete and mortars for the repair of concrete and reinforced concrete in accordance with norm DIN1045, which are not exposed to thermal stress beyond the usual climatic conditions:

 

•     pier
•     facade elements
•     bearing
•     pavements
•     Support
•     Runways
•     ceiling panels
•     tunneling parts
•     wall panels
•     Prefabricated concrete parts of all kinds
•     Betonsohlen etc.

The early initial strength of the concrete or mortar allows the removal of molds and formwork as well as the transport of finished parts after 2 to 4 hours.

Manufacture of fast-hardening concrete and mortar for laying and fixing operations for:

 

•     Tube
•     fence posts
•     rails
•     sign posts
•     rods
•     foundations
•     post
•     Wall and floor panels
•     Support
•     paving slabs
•     Door fittings, etc.

Production of quickly accessible screeds in outdoor and wet areas.

For outdoor and indoor.




Technical specifications

according to ARDEX quality standard:


Bulk density:

about 1.1-1.15 kg / l


Particle size:

specific surface according to Blaine, according to norm EN 196, part 3, 5300 +/- 500 cm2 / g


Initial setting time:

according to EN 196, part 3,

earliest after 20 min.


Volume stability:

according to EN 196, part 3


Compressive strength:

of standard mortar according to norm EN 196, part 1, according to:

2 hr. 4.0 N / mm2

1 day 16.0 N / mm2

2 days 23.0 N / mm2

7 days 34.0 N / mm2

28 days 45.0 N / mm2

90 days 47.0 N / mm2


Compressive strength:

of concrete cubes 10 x 10 x 10 cm, according to norm DIN

1048 at + 20 ° C and 65% rel. humidity stored after:

4 hours 12.0 N / mm2

7 hours 15.0 N / mm2

1 day 26.0 N / mm2

2 days 34.0 N / mm2

7 days 46.0 N / mm2

28 days 55.0 N / mm2


Package size:

25kg bag

BAUKOM fabric reinforcement

ETICS-fabric

Fabric mat, fabric reinforcement, reinforcement mesh suitable for various applications.


- 165g / m²

- 4x4mm mesh size.


(Test certificate available from the manufacturer).




Size:

Roll 1mX50m (50m²)