ARDEX B14

Concrete repair mortar

•     Based on WSZ 32.5 R-SF
•     Approval no. Z-3.12-1206
•     For repairing, filling and smoothing surface defects at structural components made of concrete.
•     Hard and durable like concrete

Application:

Repairing of load-bearing components made of old and new concrete in thick and thin layers such as:

Filling holes, eruptions and defects, repairing and smoothing concrete wall and ceiling surfaces, exposed concrete, precast concrete and cement plaster.

Dilluted with sand for filling and leveling, for example before laying tiles with thin bed method, on concrete, cement plaster and masonry.

For repairing, filling and smoothing of visible concrete.

Outdoors and indoors, on dry or damp surface.


type:


When mixed with water, a supple, pasty, stable mortar is formed, which is easy to process and hardens by hydration and drying in every layer thickness.

The cement-gray putty surfaces are water and weather resistant.



Technical data according to ARDEX quality standard:


Mixing ratio:

about 6.25 l of water: 25 kg of powder

accordingly

ca.1 water: 3 1/4 powder


Bulk weight: about 1.2 kg / l


Weight of the mortar: approx. 1.9 kg / l


Material needed: approx. 1.4 kg of powder per m2 and mm


processing time

(+20 ° C): approx. 30 min.


Compressive strength: approx. 15 N / mm2 after 7 days

after 28 days approx. 20 N / mm2


Bending tensile strength: approx. 4 N / mm2 after 7 days

after 28 days approx. 7 N / mm2


pH value: approx. 12


Corrosion behavior: contains no corrosion on steel

promotional ingredients



Package unit:

25kg paper bag

ARDEX CA20 P

SMP-Assembly adhesive

1-component assembly adhesive based on silane-modified polymers.

 

• Bonding of profiles, baseboards, cable ducts, insulation boards, wood and plastic materials, metal profiles, parquet elements, ceramic tiles and many other materials, on absorbent or dense substrates.
• Sealing of floor and connecting joints in metal, wood, ceramics and plastics.
• Can be used inside and outside.
• Solventless and anhydrous.
• High adhesion.
• Hardening without fading with elastic and vibration-resistant adhesive joint.

Application:

Insidoor and outdoor. Wall or floor.


Bonding of profiles, baseboards, cable ducts, insulation boards, wood and plastic materials, metal profiles, parquet elements, ceramic tiles and many others Materials, on absorbent or dense substrates.

Sealing of floor and connecting joints in metal, wood, ceramics and plastics


Type:

Silane-modified polymer, which hardens by reaction with moisture.


Package:

Cartridge with 310ml

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Sicherheitshinweise (CLP):P102 - Darf nicht in die Hände von Kindern gelangen

ARDEX CL300

Commercial levelling compound

• Cement-based
• Filling, leveling and smoothing of floor surfaces indoors, before laying of floor coverings, tile coverings, cast stone and natural stone tiles
• Before laying parquet when using SMP adhesives, e.g. ARDEX AF 460 MS, ARDEX AF 480 MS
• For layer thicknesses from 2 to 20 mm
• self leveling
• pumpable
• After about 2 - 3 hours accessable
• lowstress

Application:


Indoors. Floors.

Filling, leveling and smoothing indoor floor surfaces.

Preparing for floor coverings, tile coverings, cast stone and natural stone slabs.

Use under parquet when using SMP adhesives, such. Eg ARDEX AF 460 MS, ARDEX AF 480 MS


Type:


Gray powder with special cements, good dispersible plastics, selected fillers and

special additives.

The mortar hardens by hydration and drying to a low-stress mass, so that cracks are nearly impossible.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

approx. 5.75 l of water: 25 kg of powder

corresponding to approx. 1 part water: 3½ parts powder

Bulk weight: approx. 1.2 kg / l

Weight of fresh mortar: approx. 1.9 kg / l

Material requirement: approx. 1.5 kg powder / m2 / mm

Processing time (+ 20 ° C): approx. 30 min. Accessibility / laying level for tiles (+ 20 ° C): approx.

Ready for installation (+ 20 ° C): after 1 day, in layer thickness up to 10 mm

after 3 days, in layer thicknesses over 10 mm

Compressive strength: approx. 10.0 N / mm2 after 1 day

after 7 days approx. 20.0 N / mm2

after 28 days approx. 30.0 N / mm2

Bending tensile strength: approx. 3.0 N / mm2 after 1 day

after 7 days approx. 5.0 N / mm2

after 28 days approx. 8.0 N / mm2

Floor heating suitability: yes


Package size:

25kg paper bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS07
Signalwort (CLP):Achtung
Gefahrenhinweise (CLP):
H319 - Verursacht schwere Augenreizung
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen
P280 - Augenschutz, Schutzhandschuhe tragen
P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen
P302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen
P260 - Staub nicht einatmen
Zusätzliche Sätze:Inhalt/Behälter gemäß lokalen/regionalen/nationalen/internationalen Vorschriften entsorgen

ARDEX EP 2000

Multifunctional epoxi resin

•     Barrier against rising humidity in concrete floors and cement screeds up to max. 8%
•     Priming and hardening of substrates
•     Filling cracks in screeds and concrete
•     Production of epoxy screeds
•     bonding
•     Solvent-free
•     resistant to chemicals
•     Rollable and spreadable
•     Easy to process
•     High adhesion
•     Two components

Application:


Floors inside and outdoors.

Barrier against rising damp.

Priming and hardening of substrates.

Filling cracks in screeds and concrete.

Bonding.

Production of epoxy screeds.


type:

ARDEX EP 2000 is a solvent-free, low-viscosity, unfilled two-component epoxy resin.

The 1 kg unit consists of 0.7 kg of resin (component A) and 0.3 kg of hardener (component B).

After hardening ARDEX EP 2000 is water-resistant, frost-resistant and weather-resistant, has a high intrinsic strength and is practically insoluble on all suitable substrates.

ARDEX EP 2000 is resistant to aqueous salt dilutions and alkalis as well as several diluted mineral and organic acids and organic liquids and solutions.



Technical data according to:


Mixing ratio:

1: 8 parts by weight

Bending tensile strength

(after 7d / + 23 ° C): 19.0 N / mm2

Compressive strength

(after 7d / + 23 ° C): 72.0 N / mm2

Walkability: after 12 hours

Laying time: after 24 hours

Consumption:

about 2.2 kg ARDEX EP2000 and

17.3 kg ARDEX SPS special sand

per m2 / cm layer thickness



Mixing ratio:

1:11 parts by weight

Bending tensile strength

(after 7d / + 23 ° C): 14.0 N / mm2

Compressive strength

(after 7d / + 23 ° C): 53.0 N / mm2

Walkability: after 12 hours

Laying time: after 24 hours

Consumption: approx. 1.6 kg ARDEX EP2000 and

17.3 kg ARDEX SPS special sand



containers:

Can 1kg

(0.7kg resin + 0.3kg hardener)

ARDEX F11

Facade leveling compound

• Cement-based
• Weather resistant
• stressfree
• breathable

Application:

Smoothing, repairing and leveling facades, wall and ceiling surfaces.

Coating and leveling the visible concrete surfaces, rough masonry and plaster.

Filling cracks, holes and large depressions in walls and ceilings.

Smoothing of inner wall surfaces of aerated concrete.

For outdoor and indoor application.



type:

White powder on cement base.

When mixed with water, a smooth-pasty mortar is formed, which hardens by hydration and drying in each layer thickness to an almost tension-free and breathable. The hardened material is water and weather resistant.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

about 8.5 l of water: 25 kg of powder

equivalent approx. 1 parts water: 2 ¾ parts powder

Bulk weight: approx. 1.1 kg / l

Weight of fresh mortar: approx. 1.7 kg / l

Material requirement: approx. 1.2 kg powder per m2 and mm

Processability (+20 ° C): approx. 30 min.

Painting and bonding: after drying

Compressive strength: approx. 6 N / mm2 after 7 days

after 28 days approx. 14 N / mm2

Bending strength:

after 7 days approx. 2 N / mm2

after 28 days approx. 4 N / mm2

pH value: approx. 12


Package size:

5 / 25kg bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05GHS07
Signalwort (CLP):Gefahr
Gefährliche Inhaltsstoffe:Portlandzement
Gefahrenhinweise (CLP):
H315 - Verursacht Hautreizungen.
H318 - Verursacht schwere Augenschäden
H335 - Kann die Atemwege reizen.
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen.

ARDEX F5

Fiber reinforced finishing compound

Filling, smoothing and repairing facades, walls and ceiling surfaces indoors.

For preparation before dispersion coatings and plasters, mineral plasters, silicone resin paints, dispersion silicate paints, glazing, wiping and filling methods, etc.

Reliability through fiber reinforcement.

Fast hardening even with thick layers free of cracks.

Dry up to 10 mm layer thickness after 1 day.

Suitable for repairing cracks with ARDEX BU-R reinforcement fabric.

Smoothable, grindable an processable with felt-tool.

No dipping and easy to apply.


Application:

Outdoors and indoors. Wall and ceiling.

Filling, smoothing and repairing facade surfaces as well as indoor walls and ceiling surfaces before application of dispersion coatings and plasters, mineral plasters, silicone resin paints, dispersion silicate paints, glazing, wiping and filling methods.

Rehabilitation of cracks in groups A.1 and A.2 in accordance with BFS-Merkblatt 19.

type:

White powder of hydraulic binders, fillers, special additives, MICROTEC fibers and flexible operating plastics.

ARDEX FB

Pouring resin

•     Epoxy resin-based
•     For the friction-locked connection of cracks in screeds and other substrates
•     As bonding layer between substrate and new mortar or concrete
•     High Flowable
•     Excellent absobtion

Application:


Pouring, dowelling and non-positive connection of cracks and dummy joints (incised joints) in screeds - including heated screeds - and other substrates.

Bonding layer between substrate and new mortar, old and new concrete.

For outdoors and indoors.


type:

ARDEX FB pouring resin consists of the gray epoxy resin component F and the clear hardener component B.

For processing, the two quantitatively balanced components are thoroughly mixed.

Processing time: approx. 90 minutes at temperatures of + 18 ° C to 20 ° C.

Mechanical load capacity: after approx. 24 hours.



Technical data according to ARDEX quality standard:


Mixing ratio: according to container contents


Weight of the ready-to-use mortar: approx. 1.5 kg / l


Material needed:

The material requirements depend on the width and depth of the cracks, joints and boreholes and can be up to 300 g per meter.

As bonding layer approx. 1kg / m2 ARDEX FB casting resin is required.


processing time

(+ 20 ° C): approx. 90 min.


Mechanical loadable: after 1 day


Compressive strength: approx. 40 N / mm2 after 1 day

after 3 days approx. 50 N / mm2

after 7 days approx. 55 N / mm2

after 28 days approx. 65 N / mm2


Bending tensile strength: after 1 day approx. 25 N / mm2

after 3 days approx. 30 N / mm2

after 7 days approx. 35 N / mm2

after 28 days approx. 35 N / mm2


containers:

Can 1kg

ARDEX FIX

Super fast leveling compound

with ARDURAPID effect.

Cement-based.

Repair filler with finish character for floors.

Ready for tiling after 30 minutes.

Primer not necessary.

Fast hardening,

fast drying,

leveling to zero layer thickness.

For filling holes and eruptions,

for leveling and tiling of height offsets and bumps

For spot fillings.


Application:

Repairing surfaces before laying floor coverings.

Filling holes, eruptions and slits.

Compensation of height offsets on screeds, chipboards and other building boards.

Leveling of unevenness in cement, calcium sulphate and mastic asphalt screeds, concrete floors, chipboard, tiles and slabs.

Filling defects in old and new filler layers.

Can be used in layer thicknesses from 0 to 4 mm.

For indoors.

ARDEX G10

PREMIUM flexible tile grout

• Cement based grout

• For joining ceramic tiles and slabs as well as glass mosaics, glass tiles and natural stone

• Increased color stability

• For joint widths of 1-10 mm

• Good flank adhesion

• Easy to insert with a long period of washability



Characteristics:

ARDEX G 10 PREMIUM Flex-Grout Mortar fine, has after hardening water and dirt repellent properties.

The high ductility and good flank adhesion cause a stress reduction in thermally stressed surfaces and contribute significantly to the durability of the coverings.


Scope of application:

Indoors and outdoors. Wall and floor.


For joining tiles and slabs:

- Porcelain stoneware, stoneware and earthenware

- Natural and cast stone panels

- Glass, - and glass mosaic

For joint widths of 1 - 10 mm.


type:

Cement-bound premium joint mortar with special fillers and additives for fine joint surfaces, optimum processing quality, increased color constancy, independent of the water absorption of the covering material used, as well as a long washability.


Package size:

Bucket 5 kg + Bag 12,5 kg

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]

Gefahrenpiktogramme (CLP):

Signalwort (CLP):Gefahr

Gefährliche Inhaltsstoffe:Portlandzement

Gefahrenhinweise (CLP):
H315 - Verursacht Hautreizungen.H318 - Verursacht schwere AugenschädenH335 - Kann die Atemwege reizen.

Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen.P261 - Einatmen von Staub vermeiden.P280 - Augenschutz, Schutzhandschuhe tragen.P302+P352 - BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser und Seife waschen.P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

ARDEX

ARDEX G6 FLEX 1-6

Flex- joint compound


Cement-base

For joint widths of 1-6 mm


For indoor and outdoor application


Flexible,

long processibility,

Water and dirt repellent,

highest strength.

Quartz-free - Very fine and smooth joint surface.

very good flank adhesion.

With preventive protection against mold fungi.

Suitable for floors and walls with integrated heating elements.


application

For jointing:
 

•     Ceramic tiles
•     glass tiles
•     Natural and concrete block boards (moisture-insensitive)
•     Mosaics of glass, porcelain and ceramics

Material application rate:

with joint width 3 mm, joint depth 5 mm for tiles or medium mosaic
of 60 x 60 cm is about 0.10 kg / m²
of 30 x 60 cm approximately 0.15 kg m²
of 30 x 30 cm is about 0.20 kg / m²
of 15 x 15 cm is about 0.35 kg / m²
of 10 x 10 cm is about 0.45 kg / m²
of 5 x 5 cm about 0.90 kg / m²

The additional losses due to wasted material on the tiles are 0.05-0.10 kg / m², depending on their surface finish and operation.

Processing time (+ 20 ° C): approx. 1.5 hrs.
Walkability (+ 20 ° C): after approx. 4 hours

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05
Signalwort (CLP):
Gefahr
Gefährliche Inhaltsstoffe:
Portlandzement
Gefahrenhinweise (CLP):
H315 - Verursacht HautreizungenH318 - Verursacht schwere Augenschäden
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangenP280 - Augenschutz, Schutzhandschuhe tragenP305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülenP302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschenP261 - Einatmen von Staub vermeiden.