ARDEX 7

Reactive powder for sealing adhesive

• Sealing adhesive for laying the ARDEX SK 100 W
• Indoor and outdoor waterproofing membrabe, in swimming pools, on balconies and terraces in combination with the ARDEX SK TRICOM sealing kit
• Fast hardening and drying
• Solvent-free
• Meets the requirements of norm EN 12004

Application:

Indoors and outdoors, wall and floor.

Sealing adhesive for laying the ARDEX SK 100 W indoor and outdoor waterproofing, in swimming pools, on balconies and terraces in combination with the ARDEX SK TRICOM sealing kit.


type:

ARDEX 7 + 8 consists of the solvent-free ARDEX 8 acrylate dispersion with a liter weight of approx. 1 kg and ARDEX 7 cement-based reactive powder with a density of approx. 1.2 kg / l.

Both components are mixed for processing.


Technical data according to ARDEX quality standard:


Mixing ratio:

adhesive consistency

5,00 kg ARDEX 7 reactive powder

4.25-5.00 kg ARDEX 8

acrylate dispersion


trowelable consistency

5.0 kg ARDEX 7 reactive powder

3.5 kg ARDEX 8 acrylate dispersion


Weight of the mixed

Mortar: adhesive consistency

about 1.3 kg / l

trowelable consistency

about 1.4 kg / l


Material needed: on a smooth surface

with toothing 3 x 3 x 3 mm:

ca, 0.6 kg of powder +

about 0.4 kg dispersion =

approx. 1.0 kg of mixed material

per m²

with teeth 4 x 4 x 4 mm:

about 0.8 kg of powder +

about 0.6 kg dispersion =

approx. 1.4 kg of mixed material

per m²


processing time

(+20 ° C): approx. 60 min.

walkability

(+20 ° C): after approx. 2 hours



Packaging unit:

Bag 5kg

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05
Signalwort (CLP):
Gefahr
Gefährliche Inhaltsstoffe:
Portlandzement
Gefahrenhinweise (CLP):
H315 - Verursacht HautreizungenH318 - Verursacht schwere Augenschäden
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen
P280 - Augenschutz, Schutzhandschuhe tragen
P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen
P302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen
P261 - Einatmen von Staub vermeiden

ARDEX 8

Dichtmasse (Dispersion)

Sealing under tiles and slabs indoors and outdoors.

Spreadable,

putty applicable,

solvent-free,

toughness,

deformable

crack bridging.


Approved by the building authorities for the production of a composite sealant in highly loaded wet areas of the stress class A and B according to »Prüfgrundsätze zur Erteilung eines allgemeinen bauaufsichtlichen Prüfzeugnisses für flüssig zu verarbeitende Abdichtungsstoffe im Verbund mit Fliesen- und Plattenbelägen«.


Application:

Indoors and outdoors. Wall and floor.

Sealing of wall and floor surfaces under tile and slab linings in the case of stresses such as occur in shower rooms, bathrooms, shower areas above bathtubs and sanitary facilities in public and commercial areas with floor drains.

Also suitable for smoothing out irregularities.

Sealing of wall and floor surfaces of stress classes A according to the test principles

(eg public showers, swimming pool walks, etc.) as well as the areas under moderate loads according to class A0 and B0 (eg domestic baths, bathrooms of hotels, etc.).

For outdoor use:

Waterproofing and protection of the substrate against moisture penetration and efflorescence on terraces and balconies under tile and slab linings. Suitable substrates are cement screeds and concrete.

type:

ARDEX 8 + 9 consists of the solvent-free ARDEX 8 acrylate dispersion with a weight of approx. 1.0 kg/litre and the ARDEX 9 reactive powder on a cement basis with a bulk density of approx. 1.2 kg / l.

For processing, the two components are mixed. When hardened, ARDEX 8 + 9 sealant is waterproof and highly ductile; does not affect dyestuffs.

Compounding:

ARDEX 8 + 9 can be applied by spreading by using a putty.

The sealing compound must first be applied in the levelable consistency, also in order to form the corner joints, wall connections, etc.

The mixing ratio is:

3.5 kg of ARDEX 8 acrylate dispersion

5.0 kg of ARDEX 9 Reactive Powder

To stir the spreadable consistency, the remaining ARDEX 8 acrylate dispersion is then added.

The mixing ratio is:

3.5 + 1.5 = 5.0 kg of ARDEX 8 acrylate dispersion

5.0 kg of ARDEX 9 Reactive Powder


Bucket size:

5kg (dispersion compound)

(ARDEX 9 reactive powder is also required for mixing)

ARDEX 9

Dichtmasse (Reaktivpulver)

Sealing under tiles and slabs indoors and outdoors.

Spreadable,

putty applicable,

solvent-free,

toughness,

deformable

crack bridging.


Approved by the building authorities for the production of a composite sealant in highly stressed wet areas of class A and B according to »Prüfgrundsätze zur Erteilung eines allgemeinen bauaufsichtlichen Prüfzeugnisses für flüssig zu verarbeitende Abdichtungsstoffe im Verbund mit Fliesen- und Plattenbelägen«.


Application:

Indoor and outdoor. Wall and floor.

Sealing of wall and floor surfaces under tile and slab linings in the case of stresses such as occur in shower rooms, bathrooms, shower areas over bathtubs and sanitary facilities in public and commercial areas with floor drains.

Also suitable for smoothing out irregularities.

Sealing of wall and floor surfaces of class A according to the test principles

(eg public showers, swimming pool walks, etc.) as well as the areas not subject to structural control under moderate loads according to class A0 and B0 (eg domestic baths, bathrooms of hotels, etc.). ).

For outdoor use:

Waterproofing and protection of the substrate against moisture penetration and efflorescence on terraces and balconies under tile and slab linings. Suitable substrates are cement screeds and concrete.

type:

ARDEX 8 + 9 consists of the solvent-free ARDEX 8 acrylate dispersion with a weight of approx. 1.0 kg/litre and the ARDEX 9 reactive powder on a cement basis with a bulk density of approx. 1.2 kg / l.

For processing, the two components are mixed. When hardened, ARDEX 8 + 9 sealant is waterproof and highly ductile; does not affect dyeing on joint seal.

Compounding:

ARDEX 8 + 9 can be applied by spreading and by using a putty.

The sealing compound must first be applied in the levelable consistency, also in order to form the corner joints, wall connections, etc.

The mixing ratio is:

3.5 kg of ARDEX 8 acrylate dispersion

5.0 kg of ARDEX 9 Reactive Powder

To stir the spreadable consistency, the remaining ARDEX 8 acrylate dispersion is then added.

The mixing ratio is:

3.5 + 1.5 = 5.0 kg of ARDEX 8 acrylate dispersion

5.0 kg of ARDEX 9 Reactive Powder


Package size:

5kg bag (reactive powder)

(dispersion ARDEX 8 is also required for mixing)

(dispersion ARDEX 8 is required for mixing)

ARDEX A38 MIX

4 hours-screed

• Made with ARDEX A 38 - 4 hour screed binder
• For the production of fast-usable and tilable cement screeds on insulating layer, on separating layer and in composite
• For repair work on cement screeds
• Ready for tiling after 4 hours for tiles, natural stone and cast stone slabs
• After 2 days ready to be laid with elastic and textile coverings as well as parquet
• Can be used indoors and outdoors
• Matches the requirements of DIN 18560 and EN 13813 (strength class CT-C35-F5)
• Processable time 60 minutes

Application:

Making cement screeds with fast accessibility and quick initial strength

- in composit

- on release layer

- on insulating layer (as floating screed)

- as screed with integrated heating
 
Repairing and renovating cement screeds before laying

- Tiles

- Natural stone and cast stone panels

- elastic and textile floor coverings

- Parquet

After approx. 4 hours, ready for laying, for tiles, natural stone and cast stone slabs.

After approx. 2 days, ready for laying for elastic and textile coverings as well as parquet.

For indoor and outdoor use.


type:

Dimensionally stable binder system with additives and special additives for almost shrinkingless and tension-free hardening and drying as well as to avoid efflorescence.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

about 1.75 liters of water: 25 kg of powder

corresponding to about 1 part water: 7.7 parts powder

Bulk weight: approx. 1.8 kg / l

Fresh weight of the mortar: approx. 2.2 kg / l

Material requirement: 22 kg powder per m2 and cm

Processing time (+20 ° C): approx. 60 min.

Accessibility (+20 ° C): after approx. 2 -3h.

Compressive strength: approx. 35 N / mm2 after 1 day

after 7 days about 40 N / mm2

after 28 days approx. 45 N / mm2

Bending tensile strength: after 1 day approx. 4.5 N / mm2

after 7 days approx. 5.0 N / mm2

after 28 days approx. 5.0 N / mm2

Floor heating suitability: yes


containers:

25kg bag

Kennzeichnung (VERORDNUNG (EG) Nr. 1272/2008)
Enthält Portlandzement
Beschriftung Gemäss (Eg) Nr. 1272/2008

Signalwort Gefahr
Gefahrenhinweise
H315 Verursacht Hautreizungen.
H318 Verursacht schwere Augenschäden.
Sicherheitshinweise
P102 Darf nicht in die Hände von Kindern gelangen.
P280 Schutzhandschuhe tragen.
Augenschutz tragen.
P262 Nicht in die Augen, auf die Haut oder auf die Kleidung gelangen lassen.
P305+351+338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser
spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P337+313 Bei anhaltender Augenreizung: Ärztlichen Rat einholen/ärztliche Hilfe
hinzuziehen.
P402 An einem trockenen Ort aufbewahren.
P501 Inhalt/Behälter gemäß lokalen Vorschriften entsorgen.
Inhalt/Behälter gemäß regionalen Vorschriften entsorgen.
Inhalt/Behälter gemäß nationalen Vorschriften entsorgen.
Inhalt/Behälter gemäß internationalen Vorschriften entsorgen.

ARDEX A38

Ready-in-4-hours screed binder

Make quick-to-use and ready for further processing cement screeds on insulation layers, separating layer or as composite layer indoors and outdoors.


After 4 hours drying ready for tiling of tiles, natural stone or concrete blocks.

After 2 days drying ready for laying elastic and textile floor coverings as well as parquet.


Dimension-controlled binder system: That means that the drying process is nearly shrinkage- and stress-free.

Matches the requirements of DIN 18560 and EN 13813 (strength classes CT-C35-F4 to CT-C45-F5).

Processing period is up to 60 minutes.


Application:

Indoor and outdoor application.

Make quick-ready and usable cement screeds

- as composit

- on seperating layer

- on insulation layer

- as screed with integrated heating elements
 

For later support of

- tiles

- Natural stone and concrete block slabs

- elastic and textile floor coverings

- Parquet flooring

ARDEX A45 FINE

Stable leveling compound from 0-20mm

• processable down to zero mm for surface finish

• On all suitable surfaces as a repair filler and smoothening filler

• Very quick drying

• Reactivatable and very easy to modelable

Scope of application:

Indoors. Floor.

Stable leveling compound for filling, leveling and trowelling:


• Leveling and repairing steps and pedestals

• filling of holes and cracks eg. in screeds or in concrete floors

• repairing of height offsets and bumps

• Fine and surface finishes


ARDEX A 45 fine is a universal leveling compound with excellent processing properties. Even after 10-15 minutes the surface can be applied and modeled.

Type:

Gray powder with special cements, selected mineral fillers and good dispersible plastics.

Package Size:

25kg

GISCODE: ZP1 = zementhaltiges Produkt, chromatarm
EMICODE: EC1 = sehr emissionsarm
Kennzeichnung nach GHS/CLP: GHS05 "ätzend"

Signalwort: Gefahr
Kennzeichnung nach GGVSEB/ADR: keine

ARDEX A46

Solid external leveling compound

Cement-based.

Filling holes, recesses, bumps, slits, outbursts in floor and wall surfaces.

Mending and leveling steps and pedestals.

Making down-grade leveling and leveling transitions on floor surfaces.

For indoor and outdoor use.

Easy processing,

smoothable with putty and felt-tool,

quickly accessible,

fast loadable,

without cracks.


Application:

Indoors and outdoors. Wall and floor.

Leveling of floor and wall surfaces in layer thicknesses from 2 to 30 mm.

- on concrete, cement screed, masonry (except aerated concrete), plaster of mortar groups P II and P III and other suitable substrates.

- Before tiling of tiles and plate coverings, paints and coatings

- as top layer in normally stressed areas

- under flat filler layers of ARDEX K301 Exterior Filler

ARDEX A826

Wall smoothing compound

Gypsum plastic base.

For smoothing and filling wall and ceiling surfaces.

For putty works according to quality levels Q1-Q4 *.

Extra efficient.

Non-combustible building material.

Class A1 according to norm EN 13501, part 1.

Joint filler for joint filling without joint tape, type 4B, according to norm EN 13963.


Application:

Manufacture flat, smooth and stress-free wall and ceiling surfaces for wallpapering, for plastic paints, lacquers and emulsion paints, for plastic wall panels and foils as well as for cutting and smoothing techniques in building paintings.

Filling cracks and holes.

Close of joints.

Placing plasterboards.

Bonding and coating of rigid foams.

Dowelling and inserting brackets for fittings, installations, etc.

For indoor usage.

type:

White powder on plaster-plastic base.

When mixed with water, a smooth-pasty mortar develops, which adheres firmly to wall and ceiling surfaces after hardening, no matter if it is lime, gypsum or cement plaster, concrete, building boards or masonry.

ARDEX A 826 has excellent filling characteristics and can be applied quick an easy with a single application even in several centimeters thickness.

ARDEX A 826 is breathable, neutral and therefore suitable for paints, binders and adhesives.

ARDEX A828 COMFORT

Ultra-Lightweightfiller

• easy mixing even of larger quantities

• Consistent consistency within processing time

• Good finishing without grinding

• Processable down to zero mm possible

• Very efficient

• Very easy to sand

• Any layer thicknesses


Scope of application:

Indoors. Wall, ceiling.


- For smoothing and filling of wall and ceiling surfaces

- Filling joints in plasterboard and gypsum fiber boards

- For leveling according to quality levels Q1-Q4 *

- on sustainable emulsion paints and latex paints without pre-painting


type:

White filler based on gypsum-plastic with lightweight filling additives.

Quick stirring time and easy processing. High stability and good filling capacity. ARDEX A 828 COMFORT is vapor-permeable and suitable for absorbing paints, design techniques and wallpaper.

Package size:

15kg

ARDEX A828

Wandfüller

Based on gypsum-plastic.

Wall filler with the advantages of a high-speed plaster.

For closing of joints on gypsum boards, etc. Building panels.

For leveling work in accordance with levels Q1-Q4 *.

Drying evenly in each layer thickness.

Less shrinking.

Remains free of cracks.

Non-combustible building material class A1 according to EN 13501, part 1.

For joint filling without joint sealing strips, type 4B, according to EN 13963.


Application:

Smoothing and plastering of raw masonry, concrete, gas concrete, light construction-, insulating panels before wallpapering and painting work.

Filling large deepenings on walls and ceilings.

Filling cracks, holes, slits and joints in gypsum boards and other building boards.

Filling of wall surfaces from lime sanding stones and panel elements.

Closing of joints in prefabricated concrete ceilings.

Relocation of gypsum boards.

Plugging and insert brackets for fittings, installations, etc..

For indoor use.

Type:

White powder on gypsum-plastic base.

When mixed with water, a smooth and paste-like mortar is formed which, after hardening, adheres firmly to all grippy wall and ceiling surfaces, whether it is masonry, concrete, gas concrete, lime, gypsum or cement plaster and building boards.

ARDEX A 828 has a extremly good filling characteristics, does not shrink, and can be easily and quickly applied even several centimeters thick in one working process.

ARDEX A 828 is breathable and suitable for later application of paints, binders and adhesives.