ARDEX N23

MICROTEC natural stone and tile adhesive

with ARDURAPID® effect

For wall and floor surfaces indoors.

Non-staining, deformation and blooming-free laying of natural stone, concrete block and cottoplates in thin and medium bed method.

Tiling and laying of stoneware and stone tiles.

Fiber reinforcement.

- Shear stresses are compensated

- Adhesion strengths are improved

- Deformation forces are reduced

Already after about 2 hours walkable / jointable,

adhesive bed thicknesses of 2 - 15 mm,

excellent bond strength,

easy processing,

fast drying.


ARDEX N 23 +

ARDEX E 90 Kunstharzvergütung:

Special adhesives with high formability (S2 according to EN 12002)

and water-repellent properties.


Application:

Indoor. Wall and floor.

Non-staining, blooming and deformation-free tiling of natural stone and natural stone slabs, concrete block and cottoplates in the thin and medium bed method.

Installation and laying of stoneware and stone tiles.

Tiling and laying of tiles and slabs on still shrinking concrete and

Masonry (at least 3 months old).

Plating on screed with integrated heating elements.

Characteristics:

Powders with special cements, fillers, special additives and flexibly operating plastics.

Stirred with water, a supple pasty adhesive mortar results which hardens by hydration with complete crystalline water binding.

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05
Signalwort (CLP):Gefahr
Gefährliche Inhaltsstoffe:Portlandzement
Gefahrenhinweise (CLP):H315 - Verursacht HautreizungenH318 - Verursacht schwere AugenschädenSicherheitshinweise (CLP):P102 - Darf nicht in die Hände von Kindern gelangenP280 - Augenschutz, Schutzhandschuhe tragenP305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülenP302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen

ARDEX N23W

MICROTEC white natural stone and tile adhesive

with ARDURAPID® effect

For wall and floor surfaces indoors.

Staining, deformation and efflorescence-free laying of stone and natural stone, cast stone and cotto slabs in the thin and the middle bed tiling method.

Preparation and laying of stoneware and porcelain stoneware tiles.

Reliability through fiber reinforcement.

- Shear stresses are compensated

- Adhesion strengths are improved

- Deformation forces are reduced

Already after about 2 hours walkable / jointable,

adhesive bed thicknesses of 2 - 15 mm,

excellent bond strength,

easy processing,

fast drying.


ARDEX N 23 W +

ARDEX E 90 resin coating=

Special adhesive with high ductility (S2 according to norm EN 12002)

and water-repellent properties.


Application:

Indoors. Wall and floor.

Staining, efflorescence and deformation-free laying of natural stone and natural stone slabs, cast stone and cotto slabs in thin and medium bed tiling method.

Preparation and installation of stoneware and porcelain stoneware tiles.

Applying and laying tiles and slabs on still shrinking concrete and concrete substrates

Masonry (at least 3 months old).

Claddings on heated screeds.

Preparation and tiling of bright, translucent marble slabs and other natural stone slabs with a translucent character.

type:

Powder with special cements, fillers, special additives and plastics with flexible effect.

When mixed with water, a smooth-pasty adhesive mortar is formed, which hardens by hydration with complete crystalline water binding.

Package sizes:

5kg bucket/25kg bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05
Signalwort (CLP):Gefahr
Gefährliche Inhaltsstoffe:Portlandzement
Gefahrenhinweise (CLP):H315 - Verursacht HautreizungenH318 - Verursacht schwere AugenschädenSicherheitshinweise (CLP):P102 - Darf nicht in die Hände von Kindern gelangenP280 - Augenschutz, Schutzhandschuhe tragenP305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülenP302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen

ARDEX P10 SR

2-K quick repair resin

•     2-K silicate resin with a wide range of applications
•     For indoor application
•     odorless
•     Very low emission
•     For friction-locked connection of cracks and joints
•     Low viscosity with good absorbtion
•     For bonding rails and profiles
•     Fast hardening and resilient
•     No stirring tool required
•     Exact and easy application

Scope of application:


Indoors.

On absorbent and non-absorbent substrates.

For friction-locked connection of cracks, dummy joints and outbursts. As an adhesive for nail bars, rails and metal profiles, wood, natural and artificial stone and other compatible materials.

Repair adhesive for the removal of local separations occurring in parquet.

Suitable for unheated screeds and heated screeds.



type:

ARDEX P 10 SR is a polymer-modified silicate resin consisting of a plastic bottle set of component A and component B.

In the outer packaging

The included shaft connectors and protective gloves are included.


Technical data according to ARDEX quality standard:


Base: polymer modified silicate resin


Mixing ratio: Component A:

300ml (0,339 kg) container

Component B:

300ml (0, 444 kg) container

Subsets: 1: 1 in parts by volume

Density: Component A: 1.13 g / cm²

Component B: 1.48 g / cm²

Color shade: Component A: brown

Component B: clear

Material consumption: The material requirement depends

according to the width and depth of the

Joints and cracks.

processing time

(+ 20 ° C): approx. 10 min.

load-bearing capacity

(+ 20 ° C): 20 min.

Curing time: 30-40 minutes


package unit:

Set 0,6L

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS07GHS08
Signalwort (CLP):
Gefahr
Gefährliche Inhaltsstoffe:
Diphenylmethandiisocyanat, Isomere und Homologe
Gefahrenhinweise (CLP):
H315 - Verursacht Hautreizungen
H317 - Kann allergische Hautreaktionen verursachen
H319 - Verursacht schwere Augenreizung
H332 - Gesundheitsschädlich bei Einatmen
H334 - Kann bei Einatmen Allergie, asthmaartige Symptome oder Atembeschwerden verursachen
H335 - Kann die Atemwege reizen
H351 - Kann vermutlich Krebs erzeugen (bei Einatmen)
H373 - Kann die Organe schädigen bei längerer oder wiederholter Exposition (bei Einatmen)
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen
P280 - Augenschutz, Schutzhandschuhe tragen
P342+P311 - Bei Symptomen der Atemwege: Arzt anrufen
P260 - Aerosol, Dampf, Nebel nicht einatmen
EUH Sätze:
EUH204 - Enthält Isocyanate. Kann allergische Reaktionen hervorrufen
Zusätzliche Sätze:Inhalt/Behälter gemäß lokalen/regionalen/nationalen/internationalen Vorschriften entsorgen

ARDEX P21

Filling primer

• Fills and primes in one working step
• Can be applicated on almost all surfaces
• For absorbent and non-absorbent surfaces
• Before floor leveling compounds and tile adhesives
• Quick drying
• short period to process next step

Scope of application:

Indoors, floor.


Filling primer and bonding layer for absorbent and non-absorbent surfaces such as:

- Concrete

- Cement screeds and calcium sulphate screeds

- old adhesive waterproof adhesive residues

- old fillers

- Magnesia and stone wood screeds

- Mastic asphalt screeds

- Tiles and tile coverings

- Terrazzo

- Dry screeds

- wooden floorboards

- particle board P4

- sanded OSB boards

- matt sanded coatings


Before ARDEX floor leveling compounds in combination with floor coverings as well as prefinished parquet and ARDEX tile adhesives


type:

White synthetic resin dispersion, special cements, highly dispersible plastic powder and fillers.


Package size:

Bucket 15kg

(Components packed in a mixing bucket with:

2 bags of 5 kg each of component A (powder) net

1 ARDEX REDUXPACK with component B (dispersion) with 5 kg net)

Einstufung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Nicht eingestuft.
Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Sicherheitshinweise (CLP):P102 - Darf nicht in die Hände von Kindern gelangen.EUH Sätze:EUH208 - Enthält Reaktionsprodukt aus: 5-Chlor-2-methyl-2H-isothiazol-3-on [EG nr. 247-500-7] und 2-Methyl-2H-isothiazol-3-on [EG nr. 220-239-6] (3:1). Kann allergische Reaktionen hervorrufen

ARDEX P4

Fast multi purpose primer

Primer and bonding layer for wall, ceiling and floor surfaces indoors and outdoors.

For absorbent and dense surfaces.

As preparation for tile adhesives, floor and wall fillers.

Reliable bonding agent with a wide range of applications.

Fast drying, solvent-free, one-component, reduced drip and spray consistency, easy to apply.



Application:

Indoors and outdoors. Floor, wall and ceiling.

Primer and bonding agent for absorbent and dense

Substrates, such as:

- Concrete,

- cement and lime cement plasters,

- cement screeds and calcium sulphate screeds,

- tile and tile coverings,

- Terrazzo,

- dispersion coatings,

- old, waterproof adhesive residues,

- dry screeds,

- PVC coverings,

- fillers.

Before application of tile adhesives, floor and floor

Wall fillers.

ARDEX P51

Primer and bonding agent

For floor, wall and ceiling.

Reliable primer with a wide range of applications.

Primer, bonding and pore closure with water-repellent effect.

Prevents the rise of air bubbles from the substrate during filling.

Solvent-free.


Application:

Primer, precoat, bonding and pore seal with water-repellent effect.

For binding powdery substrate surfaces z. B. on ground, absorbent calcium sulfate and calcium sulphate screed.

For priming cement screeds, for preparing for Filling, leveling and smoothing compounds.

As a bonding agent on smooth concrete floors, especially compacted cement screeds, quenched calcium sulphate screeds, terrazzo, sandstone, tiles and tile coverings when using fillers and thin-bed mortars.

As a bonding agent on old substrates with adhesive filler and adhesive residues.

As a pore seal on concrete floors and cement screeds:


- Prevents the rising of air bubbles from the substrate during subsequent filling work,

- It prevents the escaping of mixing water during following fillings.


For priming on gypsum, calcium sulphate and chipboards for thin-bed mortar.

As a bonding agent on smooth concrete for gypsum-bound wall fillers.

Protective coating for binding dust to leveling and leveling compounds, which are used for a short time as usable surface.

For indoor usage.

ARDEX P82

Kunstharz Voranstrich

Bonding course on smooth and dense grounds.

Solvent-free, reactive two-component resin dispersion.

Replaces neoprene pre-coat


Application:

Pre-coat and adhesive course on smooth and dense ground, such as prefabricated concrete floors or specially compressed cement screeds:
 

•      inadequately sanded asphalt pavements, old melted asphalt
•      treated calcium sulfate screeds
•      Magnesite screeds
•      chipboards
•      Wood
•      terrazzo
•      sandstone
•      tiling
•      clinker
•      sheet steel
•      Plastic coatings
•      Laqcuer, oil and plasticpaints

under spatula, fillers and thin-bed mortars.

For indoor use.


Components:

ARDEX P 82, component A, light red color

and

ARDEX P 82, component B, white color

ARDEX panDOMO SP-SL

Stoneoil

To protect dyed and polished surfaces
 

•     PANDOMO® W1, W3 10 / 3.1,
•     PANDOMO® K1, K3 10 / 3.1 and
•     PANDOMO® K2
•     Oil-wax-based
•     satin gloss
•     abrasion resistant
•     Water repellent
•     color enhancing
•     Very efficient
•     permeable

Application:


For indoor usage.

For protection of colored and polished surfaces of PANDOMO® W1, W3 10 / 3.1, PANDOMO® K1, K3 10 / 3.1 and PANDOMO® K2.

For private residential areas and areas with moderate shock and impact stress, such as in showrooms, foyers, public buildings, retail areas and private living areas.



type:

PANDOMO® SP-SL Stone Oil is an oil-wax based product.

The treatment of polished PANDOMO® W1, W3 10 / 3.1, K1, K3 10 / 3.1 and K2

PANDOMO® SP-SL stone oil produces highly abrasion-resistant, water-repellent surfaces.



Technical data according to ARDEX quality standard:


Specific weight:

about 0.9 kg / l


Consumption:

PANDOMO® W1 or W3 10 / 3.1 approx. 25 - 30 g / m2 with 1 application

PANDOMO® K1 or K3 10 / 3.1 approx. 50 g / m2 with 1 application

PANDOMO® FloorPlus (K1 + HG sand) approx. 50 - 60 g / m2 with 1 application

PANDOMO® K2 approx. 50 - 60 g / m2 with 1 application



Package unit:

Can 1L + 3L

ARDEX PANDOMO^® W1 2.0

Decor spatula / white

For the design of wall and ceiling surfaces in the interior.

Cement plastic base.

Hardens and dries quickly, low stress and crack-free at all coating thicknesses.

Easy to process.

Excellent adhesion.

Very efficient.


Application:

Creation of representative design-surfaces, e.g. in exhibition rooms, foyers, public buildings, sales areas and in private residential areas.

type:

White powder made of special cements, elastic plastic powders, selected fillers and special additives.

The powder is stirred with water to a supple mass, which can be easily applicated also in thin and thick layers and can be processed for approx. 30 minutes before drying.

Dried layers are low-stress and diffusion-free.

PANDOMO® W1 is non-corrosive.

ARDEX PU 5

Quick repair resin

Application:

Indoors and outdoors.

For friction locked connections of cracks, dummy joints and outbursts. As an adhesive for nail bars, rails and profiles made of metal, wood, natural and artificial stone and other compatible materials.

As an adhesive for various floor coverings, such as parquet, laminate, etc. The suitability must be ensured before.

Suitable for unheated screeds and heated screeds.


type:

ARDEX PU 5 quick repair resin is supplied in a twin can consisting of component A (resin) and component B (hardener). The attachment contains the shaft connectors supplied.


Mixing ratio:

Component A: 815 g can

Component B: 185 g can


Density:

about 1.5 kg / l

Colour:

Resin: gray

Hardener: beige

Material needs:

The material requirements depend on the width and depth of the joints and cracks. Closing of dummy joints requires approx. 200 g / m.

processing time

(+20 ° C): approx. 10 min.

load-bearing capacity

(+20 ° C): 20 min.

Package unit:

Twin can with 815 g resin / 185 g hardener + shaft connector