ARDEX

ARDEX G8S FLEX 1-6

Flex-tile grout, quick

Cement-base

For joint widths of 1-6 mm


For indoor and outdoor


Quick hardening and resilient,

flexible,

Water and dirt repellent,

smooth joint surface,

very good flank adhesion,

highest strength.

With preventive protection against mold.

Suitable for floor and wall heating.


application

For jointing of:
 

•     Porcelain stoneware, stoneware and stoneware tiles
•     glass tiles
•     Natural and concrete stone tiles (insensitive to moisture)
•     Mosaic of glass, porcelain and ceramics

Material need:

with joint width 3 mm, joint depth 5 mm for tiles or medium mosaic

from 60 x 60 cm approx. 0.10 kg / m²

of 60 x 30 cm approx. 0.15 kg / m²

from 30 x 30 cm approx. 0.20 kg / m²

of 15 x 15 cm approx. 0.35 kg / m²

of 10 x 10 cm approx. 0.50 kg / m²

of 5 x 5 cm approx. 1.00 kg / m²


The additional losses due to surplus material on the tiles amount to 0.05 - 0.10 kg / m2 depending on their surface condition and processing method



Processing time (+ 20 ° C): approx. 30 min.
Accessibility (+ 20 ° C): after approx. 90 min.


Package unit:

5kg / 12.5kg paper bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05
Signalwort (CLP):
Gefahr
Gefährliche Inhaltsstoffe:
Portlandzement
Gefahrenhinweise (CLP):
H315 - Verursacht HautreizungenH318 - Verursacht schwere Augenschäden
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangenP280 - Augenschutz, Schutzhandschuhe tragenP305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülenP302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschenP261 - Einatmen von Staub vermeiden.

ARDEX

ARDEX G9S Flex 2-15

Flexible tile grout

Product description

 

•     Cementitious Flex Grout Mortar
•     For jointing of porcelain and stoneware tiles,
•     Stoneware and stoneware moisture resistant
•     Natural and concrete stone panels,
•     Glass mosaic,
•     Porcelain and ceramics
•     For joint widths of 2 - 15 mm
•     Water repellent
•     highly deformable
•     Fast hardening and resilient
•     Flexible
•     Good flank adhesion
•     Suitable for floor and wall heating

application


Indoors and outdoors. Floor and wall.

Fur jointing of

- Porcelain stoneware, stoneware and stoneware tiles

- Natural and concrete stone tiles (insensitive to moisture)

- Mosaic of porcelain and ceramics

- clinker, split tiles and fascade bricks

- Glass block walls

Especially for porcelain stoneware, balconies and terraces.

For joint widths of 2-15 mm.

Material needed:

with joint width 6 mm, joint depth 5 mm for tiles.

from 60 x 60 cm approx. 0.20 kg / m²

from 30 x 60 cm approx. 0.30 kg / m²

from 30 x 30 cm approx. 0.40 kg / m²

from 15 x 15 cm approx. 0.60 kg / m²

of 10 x 10 cm approx. 0.90 kg / m²

of 5 x 5 cm approx. 1.80 kg / m²

The additional losses due

excess material on the

tiles vary according to their

Surface texture and

Working method 0.05 - 0.10 kg / m².


processing time

(+20 ° C): approx. 30 min.


walkability

(+20 ° C): after approx. 90 min.

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05
Signalwort (CLP):
Gefahr
Gefährliche Inhaltsstoffe:
Portlandzement
Gefahrenhinweise (CLP):
H315 - Verursacht HautreizungenH318 - Verursacht schwere Augenschäden
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangenP280 - Augenschutz, Schutzhandschuhe tragenP305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülenP302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen P261 - Einatmen von Staub vermeiden
Zusätzliche Sätze:Inhalt/Behälter gemäß lokalen/regionalen/nationalen/internationalen Vorschriften entsorgen

ARDEX

ARDEX GK

Belastungsfuge

Product description

 

•     Cement-base
•     For jointing of tiles and slabs
•     in workshops, car washes, swimming pools,
•     water tanks, on commercial sites,
•     Stairways, arcades, balconies
•     and terraces
•     For joint widths from 4 mm
•     Resistant to de-icing salt, high-pressure cleaner,
•     high temperatures, mineral oils and common detergents
•     High mechanical strength and abrasion resistance
•     Already walkable after 90 minutes
•     free of cracks

application


Insidoors and outdoors. Floors and walls. For jointing of

- Tiles made of stoneware and porcelain stoneware

- Concrete blocks

- Natural stone slabs (insensitive to moisture)

- split plates and clinker plates

- Fascade bricks and glass blocks

in workshops, car washes, swimming pools, drinking water tanks, on commercial areas, staircases, arcades, balconies and terraces.



Material demand:

with joint width 10 mm,

Joint depth 5 mm

for tiles

of 60 x 60 cm approx. 0.30 kg / m2

from 30 x 60 cm approx. 0.50 kg / m2

from 30 x 30 cm approx. 0.65 kg / m2

of 15 x 15 cm approx. 1.30 kg / m2

of 10 x 10 cm approx. 2.00 kg / m2

The additional losses due

excess material on the

Tiles vary according to their

Surface texture and

processing method 0.05-0.10 kg / m2.


processing time

(+5 ° C to 20 ° C): approx. 30 min.


walkability

(+20 ° C): after approx. 90 min.


Colour:

gray


Package size:

25kg paper bag

ARDEX K 15 DR

Glätt- und Nivelliermasse

with ARDURAPID effect.

Very low emission.

On cement basis.

With optimized processing and improved yield.

Filling compound,

Leveling compound,

Thin screed,

Self smoothing.

Produces prepared surfaces in one working area for further steps.

Herdens crackfree even in thick layers.

Also to be used on hard cast asphalt pavements.

Pumpable.


Application:

Smoothing, leveling and filling of cement, mastic asphalt and calcium sulfate screeds as well as other subsoils, for the laying of textile and elastic floor coverings, tiles and boards as well as parquet.

Composite levelling of concrete floors and raw concrete ceilings when laying floorcoverings in all areas and as a wear layer in basements and on roofs.

Self-smoothing, pumpable, crack-free even in thick layers.

For indoor use.

ARDEX K301

Aussenspachtelmasse

On cement basis.

Levelling, filling and smoothing of floor surfaces both indoors and outdoors.

Manufacture of utility layers in commercial and industrial areas, garages,

on park decks, farmyards and paths.

Levelling of floor surfaces in wet areas, permanent wet areas, on balconies and terraces, as preparation before tiling, painting or coating.

For layer thicknesses from 2 to 20 mm.

Self smoothing,

pumpable

quickly accessible,

quickly loadable,

hardening crackless.


Application:

Floor indoors and outdoors.

Filling, levelling and smoothing of floor surfaces made of concrete, cement screed, tiles and slabs, as well as other suitable subsoils.

Production of utility layers in storage rooms, workshops, production halls, garages, on park decks, courtyard areas and paths.

Levelling of floor surfaces in wet areas, permanent wet areas, on balconies and terraces, for the preparation of laying tiles and tile coverings, paintings or coatings.

ARDEX K33

Universalspachtelmasse

with ARDURAPID effect.

Very low emission.

On cement basis.

Production of evenly absorbent and even surfaces before laying of elastic and textile floor coverings, parquet and tile coverings.

For layer thicknesses of 1.5 - 15 mm, stretched to 30 mm.

Walkable after 2 - 3 hours.

Ready for further steps after 1 day at 10 mm layer thickness.

Self leveling,

grindable,

excellent filling characteristics,

pumpable

hardens crackfree.

Finished floor surfaces in one working step.


ARDEX Systemprodukt

Particularly steady bonding properties with ARDEX flooring adhesives.


Application:

Smoothing and leveling of cement, mastic asphalt and calcium sulfate screeds, concrete floors and other suitable substrates before laying of textile and elastic floor coverings, tiles and boards as well as parquet.

For indoor use.

ARDEX K39

MICROTEC Floor filling compound

Cement-based.

Filling and leveling of soil surfaces for the laying of elastic and textile floor coverings, tile and slab coverings as well as parquet.

Production of smooth and flat installation surfaces especially for PVC and PVC design coverings and large-format tile and slab coverings.

For layer thicknesses up to 10 mm, dilluted with sand up to 20 mm.

Excellent leveling and self-smoothing properties with long processing time.
 

Excellent filling characteristics,

grindable,

pumpable

without cracks.


ARDEX system product

Particularly firm bond properties with ARDEX floorcovering adhesives.


Application:

For indoor.

Filling and leveling of cement, mastic asphalt and calcium sulphate screeds, concrete floors and other suitable substrates for the laying of elastic and textile floor coverings, tile coverings and parquet.

Production of smooth and even installation surfaces, especially for PVC and PVC design coverings and large-format tile and slab coverings.

ARDEX K 80

Dünnestrich

• with ARDURAPID effect
• Cement-based
• Very low emission
• Manufacture of wear layers in commercial and industrial areas
• Leveling and smoothing of floor surfaces
• For layer thicknesses from 5 mm to 50 mm
• self leveling properties
• hardening without cracks even in thick layers
• Pumpable
• Quick accessable
• Quick loadable

Application:

Leveling and smoothing of concrete floors, cement screeds, calcium sulphate screeds, tile and slab coverings and other load-bearing substrates.

Manufacture of plane and smooth surfaces for laying tiles, natural stone and other floor coverings.

As a wear layer in cellars, basements, hobby and games rooms, corridors, attics, storage rooms and storage areas.

Manufacture of wear layers in commercial and industrial areas.

For the indoor application.


Type:

Gray powder with special cements, good dispersible plastics and selected fillers. When mixed with water, a smooth, self-leveling, smoothing and pumpable mortar is produced, which can be processed for approx. 30 minutes and can be walked on after approx. 2 hours.

The mortar hardens by hydration and drying to a low-stress mass so that cracking is nearly eliminated.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

approx. 4.75-5 l water: 25 kg powder

corresponding to 1 part of water: 4 parts powder

Bulk weight: approx. 1.3 kg / l

Fresh weight of the mortar: approx. 2.0 kg / l

Material requirement: approx. 1.65 kg of powder per m2 and mm

Processing time (+ 20 ° C): approx. 30 min.

Accessibility (+ 20 ° C): after approx. 2 hours

Ready for laying (vapor-permeable coverings, + 20 ° C): after 1 day

(diffusion-proof coverings, + 20 ° C): up to 10 mm after 1 day

up to 30 mm after 3 days

up to 50 mm after 7 days

Compressive strength: approx. 14 N / mm2 after 1 day

after 7 days approx. 20 N / mm2

after 28 days approx. 30 N / mm2

Bending tensile strength: approx. 3.8 N / mm2 after 1 day

after 7 days approx. 5.8 N / mm2

after 28 days approx. 10.0 N / mm2

Ball pressure hardness: after 1 day approx. 60 N / mm2

after 7 days approx. 65 N / mm2

after 28 days approx. 90 N / mm2

Chair role suitability: yes

Floor heating suitability: yes


Package size:

25kg bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS07
Signalwort (CLP):Achtung
Gefährliche Inhaltsstoffe:Portlandzement
Gefahrenhinweise (CLP):
H319 - Verursacht schwere Augenreizung
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen
P280 - Augenschutz, Schutzhandschuhe tragen
P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen
P302+P352 - BEI KONTAKT MIT DER HAUT: Mit viel Wasser und Seife waschen
P260 - Staub nicht einatmen
Zusätzliche Sätze:Inhalt/Behälter gemäß lokalen/regionalen/nationalen/internationalen Vorschriften entsorgen

ARDEX M4

Fast setting mortar

• Made with WITTENER SCHNELLZEMENT (quick hardening cement) 32.5 R-SF Approval no. Z-3.12-1206
• Begins to harden after approx. 30 min.
• Dry mortar with quick hardening characteristics
• For anchoring, dowelling, fixing, laying, setting, repairing, concreting, laying bricks, plastering, etc.

ARDEXM4 quick mortar with addition ARDEXE100 Wittener Baudispersion matches the requirements for use in repair work on concrete surfaces.

Investigation Report No. 5014/0140 dated 11.06.1990 of the Amtliche Materialprüfungsanstalt für das Bauwesen (official german materials testing institute for construction) "iBMB", Braunschweig.



Application:

For anchoring, dowelling and fastening facade coverings, roof elements, scaffold supports, stair stringers, stair steps, lowered ceilings, ceiling coverings, handrails, window sills, sanitary equipment, heating systems, shelves, etc.

For setting and laying tiles and slabs, natural stone, terrazzo, concrete slabs, pavement slabs.

For fixing pipes, rails, bars, posts, supports, gate mounts, fence posts, signposts, etc.

For repairing and refitting concrete and reinforced concrete components as well as cement screeds and cement plasters.

For the construction of foundations for enclosures, perimeter walls, garden stairs, garbage boxes, planters, gazebos, small animal stables and for the production of garage floors and patio tiles.

For masonry work of various kinds, for example:

Creating garden walls, base walls, partitions, natural stone walls.

For the manufacture and repair of plaster surfaces, such as in damp and wet rooms, so laundry rooms, bathrooms u. Ä.

For outdoor and indoor applications.


Type:

Gray powder, made with WITTENER SCHNELLZEMENT (quick hardening cement) 32.5 R-SF, approval no. Z-3.12-1206, and quartz additives.


Technical specifications

according to ARDEX quality standard:

Mixing ratio:

approx. 3.25 l of water: 25 kg of powder

corresponding to about 1 part of water: 4 ½ parts powder

Bulk density: approx. 1.7 kg / l

Fresh weight of the mortar: approx. 2.2 kg / l

Material requirement: approx. 20.0 kg of powder per m2 and cm

Processing time (+20 ° C): approx. 30 min.

Compressive strength: after 2 hours approx. 4 N / mm2

after 1 day about 10 N / mm2

after 7 days approx. 20 N / mm2

after 28 days about 35 N / mm / 2

Bending tensile strength: after 2 hours

about 2 N / mm2

after 1 day approx. 3 N / mm2

after 7 days about 5 N / mm2

after 28 days approx. 7 N / mm2

Corrosion influences:

contains no corrosion-promoting components on steel


Package size:

25kg bag

Kennzeichnung gemäß Verordnung (EG) Nr. 1272/2008 [CLP]
Gefahrenpiktogramme (CLP):
GHS05GHS07
Signalwort (CLP):Gefahr
Gefährliche Inhaltsstoffe:Portlandzement
Gefahrenhinweise (CLP):
H315 - Verursacht Hautreizungen.
H318 - Verursacht schwere Augenschäden
Sicherheitshinweise (CLP):
P102 - Darf nicht in die Hände von Kindern gelangen.
P261 - Einatmen von Staub vermeiden.
P280 - Augenschutz, Schutzhandschuhe tragen.
P302+P352 - BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser und Seife waschen.
P305+P351+P338 - BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
Zusätzliche Sätze:Inhalt/Behälter gemäß lokalen/regionalen/nationalen/internationalen Vorschriften entsorgen

ARDEX

Mixing bucket - 12L

Transparent bucket with measuring graduation for dosing and mixing of ARDEX products. 12L volume with mounting bracket.

containers:

1 piece